低信噪比下数字调制信号盲识别研究信息与通信工程专业论文.docxVIP

ABSTRACTAbstract ABSTRACT Abstract In this dissertation，the approaches of digital communication signal modulation recognition ar e studied．We get the effective methods for the feature extraction by studying the characteristics of different modulation styles．The advantages and disadvantages of existing modulation recognition algorithms are analyzed．The performance of these algorithms at low SNR is also analyzed too．In order to achieve blind recognition system at low SNR，the variety of all the algorithms’applications al e discussed in detail．Finally，a recognition system is designed by using different algorithms according to the characteristics of different modulation．Then，the system performance is validated through the simulation experiment．The main work are listed as follow： 1，We USe the high-order moment feature of the signal．Because of the difference in the constellation，in the second—order moment signals show different features which Can be used to differ each other．Simulation shows that，in the condition of stirOdB the recognition rate can reach 90％；when snrOdB，the algorithm can not work． 2，We use the signal’S envelope spectrum feature and power spectrum feature， square spectrum feature，higher-order spectrum feature．Using these features，we achieved modulation classification of 2FSK，MSK，BPSK，QPSK，OQPSK signals．A modulated signal will show a peak in a certain spectrum，SO we can make the numbers of these peak as characteristic parameters for modulation recognition．Simulation shows that，2FSK，MSK，BPSK，QPSK signals can be classified correctly in the condition of stir一5dB； in the condition of$nr3dB，the recognition rate of OQPSK is over 90％． 3，We USe the cyclic spectrum featum of signal．The distinguish between BPSK and UQPSK is a problem．They have similar features，SO common classification algorithms are not available．Cyclic spectrum is the extension of power spectrum．In the cyclic spectrum，some features of signal become visible．BPSK and UQPSK perform different in