新型660MW超超临界环形炉膛循环流化床锅炉-中国电机工程学报.PDFVIP

第38 卷 第10 期 中 国 电 机 工 程 学 报 Vol.38 No.10 May 20, 2018 3022 2018 年5 月20 日 Proceedings of the CSEE ©2018 Chin.Soc.for Elec.Eng. DOI ：10.13334/j.0258-8013.pcsee.171909 文章编号：0258-8013 (2018) 10-3022-11 中图分类号：TK 229 新型 660MW 超超临界环形炉膛循环 流化床锅炉技术研究 吕清刚，宋国良，王东宇，王小芳，王海刚 ( 中国科学院工程热物理研究所，北京市 海淀区 100190) Study on New 660MW Ultra-supercritical CFB Boiler Technology With an Annular Furnace LYU Qinggang, SONG Guoliang, WANG Dongyu, WANG Xiaofang, WANG Haigang (Institute of Engineering Thermophysics, Chinese Academy of Sciences, Haidian District, Beijing 100190, China) ABSTRACT: In order to solve the problems of secondary air 膛结构，该炉型炉膛水冷壁的周界长度比常规矩形炉膛水冷 penetration, heating surface arrangement and multi-separator 壁周界长度增加30%~40% 。基于冷态试验与数值计算分析， optimization layout caused by large-scale and high 获得的环形炉膛优势炉型各循环回路间物料质量偏差不超 parameterization of circulating fluidized bed (CFB) boiler, a 过8%。结合炉型优化分析、炉内屏式受热面优化布置、炉 new type annular furnace is proposed, which is completely 型热力匹配特性及水动力安全性研究，提出了不带外置换热 different from traditional rectangular single-furnace and pant 器、6 个分离器并联H 型布置的660MW 超超临界环形炉膛 legs, The length of the annular furnace wall is longer than that 循环流化床锅炉技术方案，锅炉结构简单紧凑，在满足炉膛 of the conventional rectangular furnace wall by 30%-40%. 传热要求的前提下，既有效降低了炉膛高度，又取消了常规 Based on the cold test and the numerical calculation analysis, the material quality deviation of six loops for