单钢轮振动压路机SingleDrumVibratoryRollerHS820振动压路机.PDF

HS820 单钢轮振动压路机 Single Drum Vibratory Roller HS820 振动压路机属于重型振动压路机，具有强大的激振力及很高的静线压力， 适宜碾压非粘性材料，如砾石、砾土、碎石、砂石混合料和岩石填方及半粘土等。 主要用于高等公路、矿山、堤坝、机场、港口、铁路、工业场地等大型基础工程 的压实。 HS820 vibratory roller is a heavy vibratory roller ,provided with high excitation force and high static linear pressure,applicable to roll over non-viscous materials such as gravel,gravelly soil,detritus sand and stone mixture,rock filling and semi-clay.It is mainly applied to the compaction of large foundation engineering such as high grade highway,mining area,embankment,airport,port,railway and industrial site. HS820 振动压路机•标准配置 HS820Vibratory roller • Standard configuration ●机械驱动，液压振动，单频双幅，液压转向，轻便灵活 ●发动机选用上柴SC8D180G2B1,国Ⅱ排放，动力强，扭矩大，噪音低。 ●杭齿机械换挡变速箱，操纵方便，变速平稳，冲击小，有效延长变速箱使用寿 命。 ●美国萨奥振动柱塞泵、马达、管路、接头选用派克或伊顿的产品，确保液压系 统的高性能、高可靠性。 ●整体激振室，柔性联轴器，德国FAG 或美国TKM 调心滚子振动轴承，承载能 力高，可靠性高，使用寿命长。 ●驱动桥采用临工压路机专用重型驱动桥，性能可靠，维修方便。 ●加强的前、后车架，采用优质钢板焊接而成，结构可靠，适合总负荷作业。 ●+字轴铰接，关节轴承性能可靠。 ●机罩开启角度大，开启方便。 ● The mechanical drive, hydraulic vibration, double frequency with double amplitude and hydraulic steering feature the lightness and flexibility. ●Shangchai SC8D180G2B1 is adopted for engine, featuring in China II emission compliance, high power, high torque and low noise. ● The mechanical shift gearbox from Harbin FAW Gearbox Co., Ltd. is featured by convenient manipulation, stable gearshift and low impact, effectively prolonging the service life of gearbox. ●The vibratory plunger pump and motor from U.S. Sauer and the pipeline and connector from Parker or Eaton ensure the high performance and high reliability of the hydraulic system. ● The integral vibration chamber flexible coupler and German FAG or U.S. TKM aligning roller vibratory bearing feature the high bearing capacity high reliability and long service life. ●The special heavy drive axl