油罐冷凝水回收工艺难点及节能改造措施-油气储运.PDFVIP

2015 年3 月　第34 卷第3 期 投产与运行 1000-8241 2015 03-0293-04 文章编号： （ ） 油罐冷凝水回收工艺难点及节能改造措施 强春林　曹红梅 中化（舟山）兴海建设有限公司，浙江舟山316000 摘要：研发了一套具有自吸和过滤功能，并用PLC 程序控制的全封闭式冷凝水回收装置：当油罐开 始加温时，开启油罐原冷凝水管网阀门和冷凝水回收装置排污口，同时关闭油罐冷凝水排放口疏水 器；当装置排污口有清澈冷凝水排出时，打开装置入口，关闭排污口，同时将装置调到程控状态，装置 便可自动运行。在回收装置出口装有过滤装置，使滤后水质达到锅炉供水要求。该装置对循环桶、 储水桶和冷凝水管道均进行保温处理，使冷凝水的热量得以保存，减少了热量散失，具有广泛的应用 前景。（图2，表2，参10 ） 关键词：油罐；冷凝水；回收工艺；效果评价 中图分类号：TE832　　　　 文献标识码：A　 　　　doi ：10.6047/j .issn.1000-824 1.2015.03.015 Technology difficulties and energy saving transformation measures in condensed water recovery of oil tank QIANG Chunlin, CAO Hongmei Sinochem (Zhoushan) Xinghai Construction Co. Ltd., Zhoushan, Zhejiang, 316000 Abstract: A fully-enclosed condensed water recovery unit with self-suction and filtering capabilities and controlled by PLC program is developed. When the oil tank begins to be heated, the valve of original condensed water pipe network and the drainage outlet of the condensed water recovery unit are opened, and the drainer at the condensate water drain outlet of oil tank is closed. When there is clean condensed water discharged from the drainage outlet, the inlet of the unit is opened, and the drainage outlet is closed; meanwhile, the unit is adjusted to PLC mode, and then it can run automatically. A filter is installed at the outlet of the unit to ensure the filtered water meet the requirements of boiler water. All circulation cylinder, storage cylinder and condensed water pipes are insulated to preserve the heat of condensed water. The unit is prospective for wide application. (2 Figures, 2 Tables