青马大桥结构健康监测系统.pptVIP

Part 1 Bridges with WASHMS 1. WASHMS refers to Wind And Structural Health Monitoring System. Application: “wind sensitivity structures”, i.e. frequency lower than 1 Hz. 3. Existing Bridges with WASHMS: (i) Tsing Ma Kap Shui Mun Bridges - LFC-WASHMS. (ii) Ting Kau Bridge - TKB-WASHMS. 4. Future Bridges with WASHMS: (i) The Cable-Stayed Bridge (Hong Kong Side) in Shenzhen Western Corridor - SWC-WASHMS. (ii) Stonecutters Bridge - SCB-WASHMS. Bridges with WASHMS ? Locations ? Bridge Types ? Functions ? Major Structural Features Shenzhen Western Corridor - Route Part 2 System Architecture and Operation of WASHMS Accelerometers Portable Bi-axial Accelerometers on Suspenders of Tsing Ma Bridge Detail of Accelerometer Mounted on Suspenders Global Positioning System Displacement Transducers Displacement Transducer (Longitudinal) at Cross-Frame of Kap Shui Mun Bridge ( at Ch. 22 228 )  Displacement Transducer (Longitudinal) Detail of Displacement Transducer (Longitudinal) Weldable Foil-Type Strain Gauges General Layout of Single Strain Gauge Single Strain Gauge Pair Strain Gauge for measuring net tension Plan of Upper Horizontal Bracing Beam Pair Strain Gauge at Top Chord Location of Pair Strain Gauge at Longitudinal Truss Single Strain Gauge on Rocker Bearing at Tsing Yi Abutment of Ting Kau Bridge Single Strain Gauge Single Strain Gauge Layout Level Sensing Stations Anemometers Temperature Sensors Dynamic Weigh-in-Motion Sensors Data Acquisition and Transmission System (DATS) Portable Data Acquisition System (PDAS) Data Processing and Control System (DPCS) Structural Health Evaluation System (SHES) Part 6 Typical Monitoring Results First Symmetric Lateral Flexural Deck Mode First Symmetric Vertical Flexural Deck Mode First Symmetric Torsional Deck Mode First Vertical Deck Flexural Mode First Deck Torsional Mode First Deck Lateral Mode First Horizontal Tower Mode Monitoring of Static Influence Coeff