基于opc的洗煤密度控制系统的设计与实现-信号与信息处理专业论文.docxVIP

太原理r[大学硕+研究生学何论文2， 太原理r[大学硕+研究生学何论文 2， 信息化的发展要求管理数据与过程数据相互综合到一个统一的 平台上，以便使生产管理能更加高效。为此管理数据与过程数据 人机界面表达形式的形象化与易操作性成为高效管理生产的基 础，本论文从人机界面的设计与开发两个方面讨论了洗煤密度控 制系统人机界面的实现。 3、 控制系统高度智能化是每个控制系统的最终目标，为此本文对控 制过程中的PID算法的实现进行了深入分析，并探讨算法中的参 数调试过程。 整个系统设计采用了目前控制行业较先进的设计思想，利用计算 机的网络技术、通信技术、实时数据库技术和关系型数据库技术，综 合考虑了洗煤生产中的生产高效、数据稳定和信息安全，最终实现了 完整和实用的洗煤密度控制系统。 关键词：过程控制，密度控制系统，OPC，组态软件，PID II 太原理I。人学硕十研究生学行论文DESIGN 太原理I。人学硕十研究生学行论文 DESIGN AND REALIZATIoN OF COAL．WASillNG DENSITY CONTROL SYSTEM BASED ON OPC ABSTRACT It is vital to control the turbid liquid density in coal—washing production so that the turbid liquid is able to settle quickly when disturbed and to adjust itself sensitively when the ingredients of raw coal change． Thus，more demands should be made about the automatic control of the on-the spot equipment and the real—time transmission of the data．This article is made in the background of the automatic development of coal washing，based on my practice in technical reform programs，and adopts OPC(OLE For Process Contr01)，which is a new-model transmission criterion，to replace the traditional DDE(Dynamic Data Exchange)to ，‘{；q transmit the data．The terminal adopts Simens’s configuration software (Wincc)as the platform to monitor all the key equipment in the control system of coal-washing density，and carry out the friendly human—machine interface． According to the control system automation of coal-washing density 太原理。I．大学硕十研究生学付论文generalized 太原理。I．大学硕十研究生学付论文 generalized from the practice，the article falls into three parts to discuss the problems we have to face in the data control of management and process and raise some solutions． 1、The isomerism of system hardware formation results in the linking problem in obtaining process data．OPC is the best solution．The article makes a deep analysis on OPC mechanism，and realizes the basic OPC digital collection system 2、The informationized development requires that the management data and process data should integrate into a unified platform