基于OPC服务器CAN总线智能节点开发系统的研究及应用-控制理论与控制工程专业论文.docxVIP

贵州大学硕士学位论文 贵州大学硕士学位论文 PAGE PAGE 5 ABSTRACT OPC (OLE for Process Control) is designed by OPC foundation for the communication and interoperability of all kinds of automation systems. It is base on the COM/DCOM and the XML technology and builds a set of standard communication interfaces, which makes automation system able to access data from hardware more quickly and efficiently. It also makes all parts of the system able to communicate to each other seamlessly and greatly improves the interoperability and flexibility of automation system. It makes the integrations of automation systems in plant floor with enterprise information management systems possible and opens a great new space for the development of OPC specifications. This thesis introduce the background and development process of OPC technology thoroughly.based on the application and research,Delphi has developed the use of OPC client, through the variable function Write OPC Group Item Value to OPC client asynchronous write data to OPC server, and last in the Delphi four controls are used to complete DDE real-time data Acquisition.At the same time circuit model and work principle of the voltage type circuit of STATCOM are pointed out. The current measurement of STATCOM based on switching transfer functions is built by method of FBD. Also Butterworth Filter is designed by detail.The software and hardware of STATCOM is discussed too and software flow chart is given.The hardware includes Synchronous signal circuit, signal detection circuit, IGBT protection circuits.The rule of CAN-Bus in auto industry is discussed and the designment of CAN node based on independent ECAN module which is tested and verified by OPC is discussed too.At last parameter such as A power grid phase current, voltage, voltage distortion rate, the rate of current distortion, voltage imbalance, apparent power of power grid, power grids fundamental power factor commision is passed from the layer of industry to computer by Information integ