基于OCP-IP协议的片上网络接口设计-电路与系统专业论文.docxVIP

Abstract Title: The interface design of the Network On Chip based on OCP protocol Major: Circuit and System Name: WangLu Signature:伴 Supervisor: Associate prof. Shijie QIAO Abstract Signature:回护 ln recent ye缸s，system-on-chip design method has been mainstream chip design，but with the increasing scale of integrated system level more，SoC technology has met the technical challenges，such as: tbe SoC address space is limited，not unlimited increase system module; system module bus architecture c创mot support more than one while t必dng a bus，reducing communication bandwidtb; 副obal clock syncltronization andωused by power consumption etc. Network-on-chip IC design method is put forw缸din 也is background，the core idea is to use 也e routing and packet switching technoIogy to replace the bus architecture ，effective from 也e system to solve the bott leneck ofthe technique tbat SoC faces. The NoC technology will be the future development direction ofIC design. This paper first presents 也e background and the development of NoC，and a detailed analysis of the key technology of network on chip architecture. topology structure，exchange mechanism ，routing algorithm，network interface and the OCP-lP protocol ，then design and realize the network interface module and OCP-IP interface ，In order to achieve with arbitrary IP core plug and play，also designed the OCP-IP interface automatic package of software on th巳 IP kemel.Finally，the relevant function modules and the OCP斗P protocol interface to the network interface for 缸nctional simulation . Based on the function of each module，the simulation correctIy，build a 2.2 based on 2Dmesh architecture for network on chip system on the FPGA platform ，the network inter也ce bas巳d on OCP-IP protocol for FPGA authentication. On the serial port to send information ，the automatic packaging so食ware package serial control nuclear hanging in 由e 2.2 2Dmesh system for verification. the results prove that the des晤Iof the network interface can achieve the