基于PLC的风洞风速调控系统的研究-农业电气化与自动化专业论文.docxVIP

  • 12
  • 0
  • 约4.06万字
  • 约 59页
  • 2019-02-15 发布于上海
  • 举报

基于PLC的风洞风速调控系统的研究-农业电气化与自动化专业论文.docx

摘 摘 要 随着土地荒漠化的同趋严重,利用风洞试验研究风蚀问题已成为一种重要手段。 风速调控及数据采集处理作为风洞试验中不可或缺的重要环节,风速调控系统性能的 优劣直接影响风洞试验效率和试验数据的准确性。 本文针对目前国内外对风蚀风洞风速的控制大多采用开环控制,精度和自动化程 度普遍不高,且由于风速易受外界不确定因素的影响,使得风洞试验工作烦琐,数据 精度低,严重影响风蚀试验研究工作的现状,对OFDY—1.2型风蚀风洞风速的计算机 调控硬件及软件系统进行了研究。调控系统以个人计算机为开发平台,VB为调控界 面开发语言,PLC为控制器, RS-232为通信接口组建了一套闭环计算机指导的调控 系统,采用改进PID控制算法实现对风速的分段平稳调控。经试验验证,本研究所开 发的风速调控系统有效地提高了试验精度和可靠性,可为风蚀研究提供精确的风速试 验数据。 关键词:风蚀风洞;风速控制系统;PLC;改进PID算法;分段调节 ’Research ’Research on Wind Speed Control System for Wind Tunnel Based on PLC ^bstract At present,most of the wind erosion wind tunnel speed control using open loop control in domestic and foreign,Accuracy and automation degree is not high generally and the willd speed is easy to be affected by many outside uncertain factors which made the wind tunnel experiments trivial and the data accuracy low,it impact Oil the indoor wind erosion study seriously.Aming at the above problem,this paper do research on computer hardware and software of wind tunnd-wind speed control systems of OFDY一1.2. In this regulation control system,we chose VB t0 be development language for control interface,PLC to be a controller and RS-232 as communication imcrface,formed a set of closed·loop guidance system and adopted the improved PID control algorithm and subsection control to achieve wind speed control smoothly.It has verified by test that this system has effectively improved the accuracy,reliability and will provid accurate data of wind speed to wind tunnel tests. Key words:Wind erosion wind tunnel;Wind speed control system;PLC;Improved PID Di reefed by:Prof.TONG Shumin App I i cant for Master degree:T I AN J i anchuan(Agricultural Electrification and Automation) (College ofMechanical and Electrical Engineering,Inner Mongolia Agricultural University,Hohhot 01 001 8,China) 内蒙古农业大学 内蒙古农业大学 研究生学位论文独创声明 本人申明所呈交的学位论文是我本人在导师指导下进行的研究 工作及取得的研究成果.据我所知,除了文中特别加以标注和致谢蚶 地方外,论文中不包含其他人已经发表或撰写过的研究成果:‘也不包 含为获得我校或其他教育机构的学位或证书而使用过的材料,与我一 同工作的同志对本研究所做的任何贡献均已在论文中作了明确的说‘ 明并表示谢意. 申请学位论文与资料若有不实之处。本人承担一切相

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档