基于Win32串口控制的交通管理信号切换系统的设计与实现软件工程专业论文.docxVIP

摘要 摘要 I I PAGE PAGE IV 摘要 智能交通技术是现代城市发展的一个方向，将现代信息技术应用与日常的交 通管理结合可以给人们的生活带来极大地便利，是城市现代化的一个重要标志。 在城市智能交通的开发中，需要对大量的信号进行处理，最常见的是控制一些交 通信号，比如红绿灯信号、路况信号、车辆信号等，这些信号在应用中经常需要 切换，有的是从多路信号中选择需要关注的信号，有的是对信号进行一些控制， 这些信号切换和控制功能在实际中应用非常广泛，本课题就是针对交通管理中经 常出现的信号切换和控制问题进行开发研究。 本课题从实际需求出发，采用软件工程的基本设计思想解决信号切换和控制 问题，对信号的处理采用 Win32 串口技术进行设计。对于这样一个现实中的项目 本文主要做了以下一些工作：首先是采用面向对象的设计思想对系统进行分析和 设计，设计系统的总体架构，其次是系统的具体实现，对每个功能模块进行详细 的实现，最后对系统进行测试，投入运行。课题对 Win32 下的串口控制问题进行 了详细的分析和实现，另外对面向对象的设计和 XML 技术的应用也进行了研究， 对交通管理中经常出现的信号切换和控制问题进行解决，对同类问题的解决也有 很好的借鉴作用。 关键词： Win32 串口编程 ， 智能交通管理系统， 信号切换 ABSTRCT ABSTRACT Intelligent transportation technology is a modern urban development direction of modern information technology combined with the day to day traffic management to peoples lives can be greatly facilitated, is an important indicator of urban modernization. Intelligent traffic in urban development, the need for a large number of signal processing, the most common is to control the number of traffic signals, such as traffic light signals, traffic signals, vehicle signals, These signals often need to switch applications, some signal from the multi-select signal of concern, some are a little more control on the signal, which signal switching and control functions is widely used in practice, the subject is always there for traffic management signal switching and control research and development issues. Proceeding from the actual demand of the subject, using the basic design of software engineering to solve problems and control signal switching, signal processing techniques used to design Win32 serial port. For this project a reality, this paper has done the following work: First, object-oriented design of the systems analysis and design, design of overall system architecture, followed by concrete implementation of the system for each function module in detail the realization of the final test of the system, put into operation. Subject to the Win32 serial port under the control of a detailed analysis a