基于半张量积稳定性分析的高压SVC负面效应抑制研究-电气工程专业论文.docxVIP

哈尔滨工业大学工程硕士学位论文 哈尔滨工业大学工程硕士学位论文 万方数据 万方数据 Abstract Static var compensator is a kind of reactive power compensation device which has advantages to have better economy and high capacity. SVC devices improve power quality through satisfying the request of grid reactive. Though, an unreasonable system design would cause negative effects which seriously threaten the reliable operation of power system. In order to solve negative effects caused by var compensator devices, such as PT burned, electric equipments twinkling in a 10kV coal distribution grid. This article designs parameter for SVC, study the switch control strategy, analyze the system stability. The work provides an excellent solution to suppress the negative effects in the grid. Firstly, in order to solve the negative effects in the actual conditions, such as current impact, high distortion rate, low power factor. According to the national standards and actual demands, this paper designs reasonable structure of device and confirms SVC device consisted of TSC and PPF. Based on power compensation rules, paper designs the capacity, reactance rate and other parameter. In order to guarantee the safe operation under high voltage conditions, analyze the mechanism of the valve, design the voltage balance circuit. Then, aiming to avoid the grid collapse caused by unreasonable parameter design, the paper applies the method based on parallel resonance and semi-tensor product to analyze the system stability, deduce the process of solving system stable field, establish the differential equations, calculate and judge the stability of transient and long-term system, which provides theory basis for designing system parameter. To ensure the switch effect, the paper applies the sapce improvement nine domains method, design the system process, which realizes the quick and safe operation. Finally, the paper establishes a MATLAB/SIMULINK model to simulate the operation, which verifies the algorithm and parameter. Compile system co