基于Zigbee网络的环境参数获取系统的研制-仪器科学与技术专业论文.docxVIP

Ab Abstract - - II - Abstract In actual industrial production, the environment may affect the accuracy of instruments and equipment, and even make the mistakes. In life, hostile environment will affect the health of humans. Therefore, obtaining of environmental parameters, especially for acoustic environment, wind environment and thermal environment, allows us to know the changes of the environment, and to avoid the damage and loss of environmental deterioration. When conducting the environmental monitoring, the traditional means are difficult to deal with the wide monitoring area, rough conditions, long-term attended and real-time monitoring demand, fragile environment. Developing an environmental data collection system based on wireless sensor network can effectively solve the problemsabove, which has important significance. This paper focuses on the environmental parameters obtaining system. According to the features and defects of the traditional environmental parameters obtaining, the paper designs an obtaining system, which is based on Zigbee network. The system uses the TIs CC2530 chip to build the network. The sensor nodes can collect acoustic information, wind information, thermal information and others, then transmit the information obtained through the wireless network to the control center, and then the control center transfers the data to the upper computer. To allow the users to operate the monitoring system and display the environmental information, this paper designs user interface to display and preservation the data. Due to the presenced unreliability of the current acoustic signal and wind signal sensors, this paper focuses on them, and discusses the principle of sound measurement and anemometer measurement, and then simulate the digital filter after collectting the sound. The paper proposed a hardware design project based on TMS320VC5509ADSP chip and AWA acoustic sensor collection unit, as well as the wind speed acquisition hardware design based