不锈钢管道预制施工方案.docVIP

不锈钢管道预制施工方案 NUMPAGES 20 一、Purpose目的 This statement is compiled to ensure the construction quality of Bayer project pipe fabrication and meet the progress requirement. This statement is used to guide the fabrication of all Stainless Steel pipe afforded by CNF in Bayer MDI。 为了保证项目管道预制工程的施工质量和满足工程进度要求，特编制本方案。本方案用以指导拜耳异氰醋酸聚醚项目MDI联合装置内CNF承担的所有不锈钢材质管道的预制施工。 二、Applicable Scope适用范围 This statement is applicable for all Stainless Steel pipe fabrication work afforded by CNF in Bayer MNB(V210) / WNILINE(V310). 本方案适用于拜耳项目MNB(V210)/WNILINE(V310)装置内CNF承担的所有不锈钢管道预制工程的施工。 三、Reference 编制依据 Technical specification and standard of this method statement: 本方案编制依据的施工技术规范和标准为： GB50235-97《construction and acceptance of industrial metal pipe project≥ GB50235-97 《 工业金属管道工程施工及验收规范》 GB50236-98《welding project construction and acceptance specification of site equipment and industrial pipe》 GB50236-98 《 现场设备工业管道焊接工程施工及验收规范》 Bayer relevant technical document standard 拜耳的相关技术资料（WN标准） 管道相关图纸 四、Overview工程概况 Work scope 工作范围 The scope of this project includes all Stainless Steel pipe fabrication of MNB/ANILINE 包括MNB、ANILINE两个装置中的所有不锈钢管道的预制。 Major project quantity 主要工程量 Stainless Steel pipe in MNB is about 4679m (pipe dia ≤DN15-≥DN600), which amounts to 70％ of the whole run. MNB装置中不锈钢管大约4679米（管径≤DN15-≥DN600）占总管道的70％ Stainless Steel pipe in ANILINE is about 1900m(pipe dia ≤DN15-＞DN400), which amounts to ANILINE装置中不锈钢管大约1900米（管径≤DN15-＞DN400）占总管道的20％ 五、 Technical conditions技术条件 Technical documents 技术文件 Three-dimensional piping drawing used for industrialized prefabrication 用于工厂化预制的管道三维图 Relative construction technical documents (working instructor, process procedure) and management procedure 相关的施工技术文件（作业指导书、工艺规程）和管理程序 Construction technical clarification card 施工技术交底卡 Standard for piping materials and fittings 管材及配件尺寸标准 Quality control documents 质量控制文件 Materials qualification or acceptance report材料合格证或验收报告 Working procedure handover slip操作工序交接单 Conformance inspecti