渐开线弧齿圆柱齿轮加工方法及其加工装置的研究-机械制造及其自动化专业论文.docxVIP

吴伟伟：渐开线弧齿圆枉齿轮加I：方法Z乏其加I：装苴的研究AB 吴伟伟：渐开线弧齿圆枉齿轮加I：方法Z乏其加I：装苴的研究 AB STRACT Gear has been used extensively in the mechanical transmission and the whole mechanical field．Gear mechanisms transmit motive power by the teeth of the driving wheel driving the driven gears in turn．It Can pass the rotary movement of the parallel axis，intersecting—axis and cross axis．Therefore，Gear transmission technology has become an important part of engineering technology,and marks the level of mechanical engineering technology development in a certain extent．Although the technologies for the design and manufacturing of gears have been improved quite a lot in these few decades，the stability、the carrying capacity and the service life of gears are all factors restricting the development of gear technology．Thus，researches on developing innovative gears with better characteristics are necessary． The involute arc cylindrical gear which this paper puts forward is one new type of gear transmission form．Arc cylindrical gear has some excellence for example：it has good mesh capability、the axial force could be cancelled one another、the transmission efficiency is high， the anti—curved intensity is big、the tooth face contact intensity is good and SO on．The arc cylindrical gear has the superior transmission characteristic，SO it could replace the using of spur cylindrical gear、helical cylindrical gear and herringbone cylindrical gear in the majority application environment．And it also has other characteristics，for instance．steady transmission、 low transmission noise、high efficiency、long service life，etc．It call be used in the arc cylindrical gear pump、arc cylindrical gear retarder and some other fields．It has the broad application prospect． However,due to the structural parameters of the involute arC cylindrical gear have not been conclusive，That would inevitably hinder the gear processing technology research and application．After analyzing the geometry parameters and process methods of similar arch cylindr