接地网分块故障诊断应用软件的研制-电子与通信工程专业论文.docxVIP

Subject : Software Development of Grounding Grid Corrosion Diagnosis Based on Block Model Specialty : Electronics and Communication Engineering Name : Yang Zhao (Signature) Instructor : Cheng Hongli (Signature) Liu Jian (Signature) ABSTRACT In order to solve the problem of corrosion diagnosis of grounding grids, a software sub-modules of block modeling diagnosis of grounding grids is optimized and designed based on the block model on the platform of Matalab. The developed software consists of eight blocks, such as: the input and configuration module, the topology conversion module, the structural testability evaluation module, the block topology conversion module, the layer traced and fault diagnosis module, the state testability evaluation module, the possible ranges evaluation for uncertain branches module and the data output display module. Combining above modules artificially, two new processes may be formed to meet various requirements of grounding grids block diagnosis. The programming of automatically establishment of quasi-blocks, blocks, determine the block kind, determine the autonomy unit, determine the set of considered intrinsic branches is detailed. The programming of the intrinsic grounding grid to actual grounding grid by layer traced, the clear branch resistances diagnosis, the uncertain branch groups dividing, the possible ranges evaluation for uncertain branches based on dichotomy are described. The programming of combining the state testability analysis and testability value judgments based on block model to solve clear branches fault diagnosis are described. The input and output data structures are given. The relationship of the modules and the way to use the modules are also described. The designed software is tested on the example grounding grids with twenty-nine branches and sixty branches, respectively. The results show that the designed software can work out the models of the blocks of the grounding grids correctly and that it can o