TTP223N-BA6 触摸驱动IC 单键触摸IC 标准品触摸芯片.pdfVIP

专业 单键触摸IC 原厂、稳定 TTP223N-BA6 1 KEY TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The TTP223N-BA6 TonTouchTM is a touch pad detector IC which offers 1 touch key. The touching detection IC is designed for replacing traditional direct button key with diverse pad size. Low power consumption and wide operating voltage are the contact key features for DC or AC application. FEATURES Operating voltage 2.0V~5.5V Operating current @VDD=3V, no load At low power mode typical 1.5uA, maximum 3.0uA The response time max 220mS at low power mode @VDD=3V Sensitivity can adjust by the capacitance(1~50pF) outside Stable touching detection of human body for replacing traditional direct switch key Provides Low Power mode Provides direct mode 、toggle mode by pad option(TOG pin) Q pin is CMOS output All output modes can be selected active high or active low by pad option(AHLB pin) After power-on have about 0.5sec stable-time, during the time do not touch the key pad, And the function is disabled Auto calibration for life At low power mode the re-calibration period is about 4.0sec normally, When key detected touch and released touch, the auto re-calibration will be redoing after about 16sec from releasing key APPLICATION Wide consumer products Button key replacement 2016/6/15 Page 1 of 8 Version ：1.0 专业 单键触摸IC 原厂、稳定 TTP223N-BA6 BLOCK DIAGRAM Sensor Sensor oscillator I circuit Reference Output Q