自动变速箱最终测试 原理中英文 培训材料..pptx

FT简要介绍 General Description FT设备 FT Equipment 测试机信息 TEST Machine Information 测试顺序与功能 General Test Sequence and Function ;2;General Description; 程序逻辑控制器控制FT测试系统所有部件的动作。Programmable Logic Controller (PLC) controls all system tooling motions. 人机界面装置与PLC联机，监控/控制设备操作或手动操作。Human-Machine Interface (HMI) allows the operator to monitor and control system operation both in automatic and manual modes. It is connected to PLC.｛操作面板｝ 测试机收集处理测试的变速箱数据，并与PLC联机传递接受命令。The test computer controls transmission test data. It interfaces with the stand PLC, transmitting and receiving commands.(计算、发指令、采集数据);FT Equipment--Trans Location;The headstock 夹紧保持变扭器壳体。Engages and secures the transmission housing. 位于测试机变扭器壳体边。The headstock assembly is mounted below housing side of the test stand. 所有定位夹紧设备移动精度均在0.5mm以内,测试结束后自动返回原位。Be able to consistently hold position within a tolerance of 0.5mm. The device must be returned to the normal position by the test machine at the end of the test. ;FT Equipment--Trans Location;FT Equipment--Trans Location;FT Equipment– Input Drive Assembly;FT Equipment– Output Drive Assembly;Tool changer 具变速箱型号自动选择输出工具。Automatically select the slave adaptor for the output drive assembly based on the model being tested. 工具更换装置能够防止变速箱密封/衬套损伤。The tooling be designed to prevent damage to the transmission oil seals or bushings during automatic engagement and testing.;FT Equipment– Probes;The Bubbler probe measures the test oil level inside the transmission during the fill, test and evacuation step of the test sequence. 油位探针-在充油，测试，放油步骤中测量变速箱内油位。;FT Equipment– Test oil system;FT Equipment– Test oil system;Test Machine Information-PCS;Test Machine Information-PCS;Test Machine Information-PCS;19;STEP 1: ELECTRICAL CHECK description: Use GMLAN commands and feedback to verify TEHCM communication and electrical integrity of components in the TEHCM. purpose: To do the following: ? Verify communication with the TEHCM. ? Detect electrical opens/shorts. ? Detec