锅炉炉膛出口烟气温度的在线测量跟温度场重构资料.pdfVIP

30 11 动 力 工 程 学 报 Vol. 30 No. 11 2010 11 Journal of Chinese Society of Pow er Engineering Nov. 2010 : 167 7607(2010) :TK311 :A : 510. 0 王 毅, 芮晓明, 马志勇 ( , 102206) : 设计了一种基于红外测温技术的炉膛出 烟气温度在线检测系统, 研究了适用于电站锅 炉炉膛出 截面温度场的重构方法. 通过在炉膛出 处的测量截面合理安装具有扫描功能的红外 测温装置, 获得实时烟气平均温度; 利用所测在线数据, 借助傅里叶正则化算法, 实现对测量截面烟 气温度场的准确重构. 结果表明: 由测温装置扫描形成的测温路径在20~ 30 条之间傅里叶展开项 为九项时, 重构温度场效果最佳; 重建温度场最大误差为 2. 2 K, 重构时间在2 s 左右, 满足在线检 测要求. : 炉膛; 出 烟气; 红外测温仪; 傅里叶正则化; 二维温度场; 在线检测 Online Measurement for Furnace Exit Gas Temperat ure of Boilers and Temperat ure Field Reconst ruct ion WA N G Yi, R UI X iaoming , M A Zhiy ong ( School of Energy, Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China) Abstract: An online detecting system based on infrared temperature measurement technology w as designed for furnace exit gas temperature, and the method w hich w as applicable to temperature field reconstruction in the cross section of furnace exit of utility boiler w as studied. The realtime average temperature of flue gas can be achieved by reasonable installation of the infrared temperature measurement device w ith scanning function in the cross section of furnace exit. By use of the measured online data and w ith the help of Fourier regularization algorithm, accurate crosssection flue gas temprature field reconstruction can be achieved. Results show that w hen the number of the temperture scanning path formed by the temperature measuring device is betw een 20 to 30 and the Fourier expansion terms is equal to nine, the effect of temperture field reconstruction is the best. The maximum error of the reconstructed temperature field is 2. 2 K