毕业设计（论文）-上湾矿综放工作面机电设备选型设计.doc

全套图纸加扣?3012250582 辽宁工程技术大学毕业设计（论文） 上湾矿综放工作面机电设备选型设计 MECHANICAL AND ELECTRICAL EQUIPMENT TYPE SELECTION DESIGN OF FULL-MECHANIZED IN CAVING MINING FACE FOR SHANGWAN COAL MINE 毕业设计（论文）共 112 页（其中：外文文献及译文10页） 图纸共2张 完成日期 2015年6月 答辩日期 2015年6月 全套图纸加扣?3012250582 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT II 摘要 通过对内蒙古上湾煤矿的调查研究，得出该煤矿的煤层厚度大，一次性采全高相对困难，若采用普通综和机械化开采开发会产生工作面采出率低，含矸率大等问题。为了解决上湾煤矿的生产要求。确定以综放开采的形式进行开发。 本次设计的研究方法是首先通过煤矿的年产量确定日产量再通过采放比确定采煤机的生产能力，然后选择与之能够配套的相关设备。通过整理机械设备为选择相关电气设备做好基础。通过对这些设备有序的选择和整理来满足整个综合机械化开采的要求。 通过选择各种机械设备及电气设备来满足适应上湾煤矿生产需求。保证煤层的稳定开采。同时掌握所选机电设备的选型原则、计算方法，以及各设备的性能特点。 关键字：综放工作面；机械设备选型；电气设备选型；放顶煤液压支架 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT I Abstract This graduation design is the bay mine mechanical and electrical equipment type selection design of full-mechanized caving mining face. Through investigation and study of Inner Mongolia bay on the coal mine, it is concluded that the coal seam thickness, one-time mining overall height is relatively difficult, if the ordinary ensemble and mechanized mining development will produce face extraction rate is low, the gangue content big problems. In order to solve the mine production requirements. Sure, in the form of comprehensive mechanized caving mining. The research methods of this design is first determined by coal production capacity of daily output by mining put than determine the production capacity of coal winning machine, and then choose to form a complete set of related equipment. By collating machinery basis for choosing related electrical equipment. Through the selection of these devices in order and arrange to meet the requirements of the comprehensive mechanized mining. By selecting a variety of mechanical equipment and electrical equipment to meet the needs to adapt to the bay on the coal mine production. Ensure th