纤维矿渣微粉混凝土高温中的劈拉性能-硅酸盐学报.PDF

40 5 677 40 5 Vol. 40No. 5 2 0 1 2 5 JOURNAL OF THE CHINESE CERAMIC SOCIETY M a y 2 0 1 2 ( 450002) (200800 )124 (FRC-GGBFS) FRC-GGBFS FRC-GGBFS FRC-GGBFS 40% FRC-GGBFS 0.9 kg/m3 FRC-GGBFS FRC-GGBFS TU528.572 A 0454–5648(2012)05–0677–08 2012–04–23 10:40:35 /kcms/detail/11.2310.TQ1040.008.html Splitting Tensile Properties of Fiber Reinforced Ground Granulated Blast Furnace Slag Concrete at High Temperatures GAO DanyingZHAO LiangpingYANG Shuhui (Research Center of New Style Building Material and Structure, Zhengzhou University, Zhengzhou 450002, China) Abstract: Through the splitting tensile tests of fiber reinforced ground granulated blast furnace slag concrete (FRC-GGBFS) at high temperatures (200–800 ), the splitting tensile strength and splitting tensile loading–transverse deformation curve of 124 samples were measured. The effects of temperature, replacement rate of cement by slag powder, steel fiber content, polypropylene fiber con- tent on the splitting tensile strength and deformation of FRC-GGBFS were investigated. The deterioration processes of FRC-GGBFS at different temperatures were analyzed by scanning electron micrograph. The splitting tensile strength of concrete deteriorated, the splitting tensile loading- transverse deformation curves appeared more flat and the toughness of FRC-GGBFS decreased as the tem- perature increased. The addition of GGBFS, especially at the content of 40%, favored the splitting tensile properties of concrete at high temperatures. Steel fiber could increase the splitting tensile strength a