基于力学模型的平纹织物结构分析-纺织工程专业论文.docxVIP

II II 纱越不易弯曲 。 由此可见，本研究所建 的模型能够正确反映平纹织 物结构在不同条件下的变化 规律，所计算结果 可信。 本课题研究为其 他更为复杂 的机织物组织结构提供 了新的 思路。 关键词:织物结构: 纱线屈由:受力分析 :力学模型 :平纹织物 PAGE PAGE III Study on the structure of the woven plain fabric based on mechanical model Major: Textile Sciences and En gineering Name: SUN Yinyin Supervisor: Professor ZHENG Tianyong Abstract The fabric structw-e is the space intelTelation among the warps and wefts in fabric Describing the fabric structure accurately is able to get much realistic 3D simulation appea rance of the fabric. Unfol1unately，since the fabric structure theory is imperf民t ，the simulation is much distorted for complex woven，even for the simplest plain woven fabric due to the changing of the fiber material ，100m tension，etc. 1n this thesis，from the viewpoi nt of yam force in fabric，the dynam ic ch ange of yam in fabric is studi ed lIntil achieve the final balance and then obtain the position of yams，which provides profitable research to fabric structw-e calcul ation of other weaves ln the studying under the circumstance，that simplify the structural computation of Perice Model，then to select the p创ameters which can inflllence the plain fabri c shuctur巳 are ya m elastic characteristics，ymηradills，yam tension，thread count，yam material ， wa叩 and weft friction force，support ing force by 100m temple. It is assumed that yam is 巳ntire elastic body，regarding the ninth fabric structure ph ase as y am ori ginal state; then provided the original position of every interlacing ，combined the shape of yam according to straight and cwVed line，an alyzed the force sitllation with interlacin g based on elastic coefficient(coefficient of stiffness，elastic-plasticity ). Calculated yarn elongation with interlacing position ，and then calculated the situation resllltant force and component force as well as ∞mponen t ù1 巳veηdirect ion according to elongation and elastic coefficient， decided the movement tendency and direction of every interl acing. Given a certain step