基于网络的数控系统监控平台技术分析-仪器科学与技术专业论文.docxVIP

华中 科技 大学 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract To monitor the states of a CNC system for a CNC machine tool has very important practical applications and it is of great significance to achieve integration management based on network and remote fault diagnosis. The functions of the network monitoring platform have device management, real-time monitoring and data applications. All of the work is based on the in-depth study of the monitoring platform functional requirements around the practical application of numerical control system in-line monitoring needs. The development tasks which include data communication services, core monitoring and application access and so on are presented in this thesis. The communication library based on TCP transport protocol is developed used by network programming API. These development works are based on in-depth analysis of data communications services and functional requirements of the key technologies for the network monitoring platform. Communication services which provide communication service interface API for upper application software with variable service, service parameters, command services, file services and PLC data services and so on are designed and implemented based on network data transmission function of communication library. The core monitor functions such as device management, real-time monitoring and data applications are achieved based on the data analysis by collecting the state data of CNC system which are provided though communications services API interface around application requirements of the core monitoring network monitoring platform. The state data of CNC system include tracking error, the feed rate and spindle speed and so on. The monitoring application access software is developed using VC environment which has functions for concurrent monitoring of multiple DNC, graphical simulation display and operation monitoring. The network platform has been built with a star topology according to the required