汽车底盘生产线价值流图分析及改善方案.pdfVIP

第 21 卷 第 1 期 工 业 工 程 Vol. 21 No. 1 2018 年 2 月 Industrial Engineering Journal February 2018 doi: 10.3969/j.issn.1007-7375.e17-2192 汽车底盘生产线价值流图分析及改善方案 王秀红，王梦飞，索 晶，刘雪豪 (郑州航空工业管理学院 管理工程学院，河南 郑州 450015) 摘要: 为解决W公司汽车底盘生产线平衡率低，生产线布局不合理和物流与信息流不通畅等问题，利用价值流图工 具对工序进行重组，引入U型生产线和看板管理，采用柔性化的生产作业方式，设置原材料和产品终端超市。最终 使生产线平衡率由71.1%提高到93.9%，增值率由4.2%提高到9.87%，加工效率由4.3%提高到11%。 关键词: 底盘生产线；价值流图；生产线平衡；看板管理 中图分类号: THI6 文献标志码: A 文章编号: 1007-7375(2018)01-0067-06 Analysis and Improvement of Automobile Chassis Production Line Based on Value Stream Map WANG Xiuhong, WANG Mengfei, SUO Jing, LIU Xuehao (School of Management Engineering, Zhengzhou University of Aeronautics, Zhengzhou 450015, China) Abstract: To solve the problems of the low balance efficiency of automobile chassis production line, unreasonable layout and lack of information flow, the production process is restructured using the tool of value stream map. In other words, by introducing the U-shaped line and visual management and adopting flexible mode of production operation, the terminal supermarket of raw materials and products is set up. At last, as can be seen, the line balance efficiency is increased from 71.1% to 93.9%, the increment rate from 4.2% to 9.87%, the machining efficiency increased from 4.3% to 11%. Key words: chassis production line; value stream map; production line balance; dashboard management