毕业论文-某七层钢结构办公楼设计.docVIP

某七层钢结构办公楼设计 PAGE 53 某七层钢结构办公楼设计 PAGE I 本科毕业设计 土木工程 某七层钢结构办公楼设计 The design of seven-story steel office building 摘　要 【摘要】本工程为位于宁波地区的某七层办公楼建筑，平面尺寸36.0m×14.4m，建筑面积3326.40，主结构为钢框架结构体系。11榀横向框架，柱距为3.6m。办公楼底层高3.6 m，其他标准高3.0 m。 本设计包括建筑设计和结构设计两部分。建筑设计包括方案的确定，建筑施工图的绘制，而结构设计是以PKPM结构设计软件电算和一榀框架手算相结合的方式进行。结构设计主要包括荷载计算，内力计算，截面验算，节点设计，基础设计。 【关键词】钢框架结构体系；建筑设计；结构设计。 The design of seven-story steel office building 【ABSTRACT】This project is a seven-story office building which located in Ningbo .The plane size is 36.0m × 14.4m, the total area is 3326.40 sq.m, and the building is steel frame structure.11 Pin horizontal frame ,the spacing is 3.6m.The height of underlying floor of the building is 3.6 m, the standard height is 3.0 m. The design includes architectural design and structural design. Architectural design includes program identification and building construction drawing.Structural design is the combination of the calculation of software PKPM and the hand-counting of one frame.Structural design includes Load calculation, force calculation, cross checking, node design, basic design. 【KEYWORDS】steel structure ;architectural design;structural design. 目 录 1.设计总说明 1.1工程结构概况·································································1 1.2 设计依据·····································································2 1.3 钢材选用要求·································································2 1.4 施工技术要求·································································2 2设计过程········································································5 3计算书 3.1说明··········································································6 3.2 荷载取值及计算 ····························································6 3.3 荷载简图 3.3.1.横向框架荷载分布···············································12 3.3.2纵向框架荷载分布················································16 3.4 内力计算 3.4.1横向框架内力组合·······················································18 3.4.2纵向框架内力组合·······················