多孔铝合金连通孔对压缩性能的影响.pdfVIP

23 4 Vol.23 No.4 2 0 0 9 8 CHINESE JOURNAL OF MATERIALS RESEARCH August 2 0 0 9 ∗ 1 2 3 1. 210096 2. 10000 3. 210096 Æ, . , , . , , , . , , , , Æ TG146 1005-3093(2009)04-0380-07 Effect ofthrough-holeon porous aluminum alloy compressive mechanical properties HE Siyuan1∗∗ GONG Xiaolu2 HE Deping1 1.State Key Laboratory of Bioelectronics, School of Biological Science Medical Engineering, Southeast University, Nanjing 210096 2.Department of mechanics, University of technology of Troyes, France, Troyes 10000 3.Jiangsu Key Laboratory of Advanced Metallic Materials, School of Material Science and Engineering, Southeast University, Nanjing 210096 * Supported by the National Key Basic Reseach and Development Program of China No.2006CB601201. Manuscript received December 18, 2008; in revised form June 20, 2009. ** To whom correspondence should be addressed, Tel:(025 E–mail: siyuan he@seu.edu.cn ABSTRACT In accordance with preparation process of open-cell aluminum foam, a novel simplified model of pores structure was proposed to exploit the performance of the through-holes, which connect neighboring cells, on the elastic module and compressive collapse stress of porous aluminum alloy. It is shown that the results coincide with experiments in terms of elastic module and plastic collapse stress. Stress concentration neighboring the through-hole between neighboring cells was manifested by unit cell model. On account of significant effect of through-ho