电火花块反拷加工控制系统设计与实验.pdfVIP

2018 3 Mar.2018 46 5 MACHINE TOOL ＆ HYDRAULICS Vol.46 No.5 ： 10.3969／j.issn.1001－3881.2018.05.023 1 2 3 1 ， ， ， （1.， 524048； 2.， 510006； 3.， ） ： ， 。 LabView 、 、 、 。 ， ： ， ， ， ， 。 、 ， ， ， ， 。 ： ； ； LabView； ： TH165 ： A ： 1001－3881 （2018） 05－092－5 － 1 2 3 1 LIAN Haishan ， GUO Zhongning ， CHEN Yujiao ， MO Yuandong （1.Institute of Electromechanical Engineering， Lingnan Normal University， Zhanjiang Guangdong 524048， China；2.School of Electromechanical Engineering， Guangdong University of Technology， Guangzhou Guangdong 510006， China； 3.Advanced Manufacturing Technology Research Centre， Hong Kong Polytechnic University， Hong Kong， China） ： A motion control system of electric spark block anti－copy machining is designed，and feasible strategy for data acquisi－ tion and motion control also is proposed.The motion control system was developed by LabView Software，which mainly includes an ini－ tialization module，a crude tool setting module，a precise tool setting module，a process control module and a coordinate real－time indi－ cation module.Experiments on electric spark block anti－copy machining of tungsten carbide tool were carried out by using the motion control system.Orthogonal experimental results are obtained：the material removal rate increases first and then decreases with the in－ crease of the pulse width，thus the pulse width has an optimum value.On the one hand，the energy is not enough when the pulse width is small； the arc discharge is easily generated when the pulse width is large；they are all influence the material removal rate.The mate－ rial removal rate increases with the multiple of pulse