指纹识别模块程序及原理图.doc

程序： #include reg52.h #include intrins.h #define uchar unsigned char #define uint unsigned int #define Dbus P0 #define buffer1ID 0x01 #define buffer2ID 0x02 #define queren 0x88 #define tuichu 0x84 #define shanchu 0x82 sbit B0=B^0; sbit B7=B^7; sbit jidianqi=P3^6; sbit RS=P2^2; sbit RW=P2^1; sbit E1=P2^0; sbit LEDK=P3^4; //控制背光 sbit SCLK=P2^3; sbit IO=P2^5; sbit RST=P2^4; uchar code ta[8]={0x00,0x51,0x09,0x10,0x05,0x02,0x11,0xbe}; uchar data a[7]; // 秒 分 时 日 月 星期 年 uchar dz[4]; //存键输入值 uchar mima[7]; uchar mimaID[6]={1,2,3,4,5,6}; uchar data K; uchar data Key; uint PageID; uchar data querenma; uchar sum[2]; int summaf,summas; uchar code nian[]={年}; uchar code yue[]={月}; uchar code ri[]={日}; uchar code xinqi[]={星期}; uchar code mao=0x3a; unsigned char code text1[]={ 请按指纹 }; unsigned char code text2[]={ 请再次按指纹 }; unsigned char code text3[]={ 指纹采集成功 }; unsigned char code text4[]={请按任意键继续 }; unsigned char code text5[]={ 指纹采集失败 }; unsigned char code text6[]={输入删去的指纹号}; unsigned char code text7[]={ 删指纹号成功 }; unsigned char code text8[]={按键一：增加指纹}; unsigned char code text9[]={按键二：删去指纹}; unsigned char code text10[]={ 请重新按指纹 }; unsigned char code text11[]={清空指纹库成功 }; unsigned char code text12[]={ 没搜索到指纹 }; unsigned char code text13[]={请先按键再刷指纹}; unsigned char code text14[]={ 请重新操作 }; unsigned char code text15[]={ 删去失败 }; unsigned char code text16[]={ 接收包出错 }; unsigned char code text17[]={ 编号为： }; unsigned char code text18[]={指纹已找到 请进}; unsigned char code text19[]={ 该指纹已存储 }; unsigned char code text20[]={ 请输入密码 }; unsigned char code text21[]={ 密码错误 }; unsigned char code text22[]={按键三：更新密码}; // @@@ unsigned char code text23[]={请再次输入密码 }; unsigned char code text24[]={两次输入的密码不}; unsigned char code text25[]={一致，请重新操作}; unsigned char code text26[]={ 密码更新成功 }; 另外： void delay(uint tt) { uchar i; while(tt--) { for(i=0;i125;i++); } } void initialize51() { SCON= 0x50;