光纤激光雕刻机软件的研究-光学工程专业论文.docxVIP

燕山大学工学硕士学位论文Abstract 燕山大学工学硕士学位论文 Abstract As a typical equipment of integration of mechanical，electronic and optic technologies，laser engraving machine has the characteristics ofgreat efficiency, hi曲precision and non-touching processing．It USeS laser beam to irradiate the sllrface of materials to engrave．While laser beam moves relatively to the workpieee,the engraving is accomplished．Hollow-core transmitting energy fibers ale adopted t0 replace traditional optical reflectors to transmit laser beam． Thus，engraving scope is extended，maintainability is enhanced,and wonderful effects Call be achieved． Special software to deal with graphics and images are used t0 make proper design as the first step of engraving．Then,these graphics and images are disposed to control the whole system finishing the engraving．Disposing software is designed in allusion to popular file formats considering universality because there is no existing software． The main research works are as follows： (1)Computer programs are written to dispose PLT fdes in order to achieve two-dimension graphical engraving． (2)Computer programs are written to dispose STL file format．11lis program Can stratify STL file into layers；each layer is saved as PLT file format． Then,this series of PLT files are managed to achieve three-dimension engraving． (3)Computer programs are written to achieve grey-scale transformation, image enhancement and geometric transformation of BMP files to engrave iHlages． (4)Computerized embroidery machine is improved based 011 the laser engraving system．Through modification of DST files，embroidery and cutout Ⅱ Abstractcanbe Abstract canbe doneatonetime． Keywords Laser engraving；C02 transmitting energy fiber；PLT files；STL files； BMP files；DST files Ⅲ 燕山大学硕士学位论文原创性声明本人郑重声明：此处所提交的硕士学位论文《光纤激光雕刻机软件的 燕山大学硕士学位论文原创性声明 本人郑重声明：此处所提交的硕士学位论文《光纤激光雕刻机软件的 研究》，是本人在导师指导下，在燕山大学攻读硕士学位期间独立进行研究 工作所取得的成果。据本人所知，论文中除已注明部分外不包含他人已发 表或撰写过的研究成果。对本文的研究工作做出重要贡献的个人和集体， 均已在文中以明确方式注明。本声明的法律结果将完全由本人承担。 作者签字：度九嘉 日期：知1年斗月f。