长春市诚美政务中心大楼结构、施工设计.docVIP

摘 要 本次毕业设计题目是长春市诚美政务中心大楼结构、施工设计，主体九层，采用钢框架结构，总建筑面积约为10157.4㎡，总高度为35.5m。长春市地区抗震设防烈度为7度，场地类别为II类场地。本设计贯彻“实用、安全、经济”的设计原则。 此次设计包括结构、施工两部分设计。 结构设计，根据要求采用压型钢板组合楼板，梁柱采用H型钢。在确定框架布局之后，先计算了竖向荷载（恒载及活荷载）作用下的结构内力，接着进行了重力荷载代表值的计算,然后利用顶点位移法求出自震周期，进而按底部剪力法计算横向框架水平地震作用，接着求出在水平荷载作用下的结构内力（弯矩、剪力、轴力）。接着进行内力组合,找出最不利的一组或几组内力组合。选取最安全的结果进行计算并绘图。此外还进行了结构方案中的框架设计、板设计、节点设计和基础设计等。 施工设计内容为编制一份工程量清单、工程量报价、编制施工组织设计方案、绘制施工总平面图、绘制施工进度计划表。 关键词 结构设计 抗震设计 内力组合 施工组织 Abstract： ?The graduation project entitled Changchun City-US government center building structure, and construction design. The main part of the building has 9 floors, with steel frame structure. It’s total gross floor area is approximately 10,157㎡, with a total height of 35.5m. The seismic intensity of Changchun City area is 7 degrees, the site classification is II. This design implementation of the practical, safe and economical design principles. The design includes the structure design and construction design two parts. ???? First,structural design.According to requirement, the HYPERLINK app:ds:compositecomposite HYPERLINK app:ds:floorfloor use steel sheeting and beams using H-beam. After determined the frame layout, firstly, calculate the vertical loads (dead load and live load) under the action of the structural forces, followed by a gravity load representative value calculation, and then by using the vertex displacement method to calculate the seismic period, and then by using the base shear method for the horizontal seismic action of the fame.After that calculate the structure internal force under the horizontal loads (bending moment, shear, axial force). Finally,followed by a forces combination, to identify the most one group or several groups unfavorable combinations. Select the most secure combinations and do the calculation. In addition, structural design has also carried out the framework design,board design,node design and basic design and so on. ????? Construction design contents to establish