换流站控制保护系统故障辅助诊断系统研制-电力系统及其自动化专业论文.docxVIP

三峡大学硕士学位论文 三 峡 大 学 硕 士 学 位 论 文 PAGE III万方数据 PAGE III 万方数据 Abstract In the domestic，DC converter station control and protection system of fault diagnosis mainly relies on a series of fault diagnosis software of ABB MACH2 platform workstation. It includes the Intouch (message display tool), Hidraw (fault condition monitoring tool), Inspect (custom recording tools) and Reval (waveform viewer) etc. In the territory of Hubei Province, the majority of converter station to run a long time, fault diagnostic tools of control and protection system provided by foreign manufacturers have been stuck in the early stage of technology introduction. Because the system doesn’t updated and resulted in a number of issues during the operation. Including can’t capture the instantaneous switch failure, server failure, the quantity of state monitoring and event display imperfect diagnostic tool functions dispersed etc. In order to solve these problems, the development of HVDC control and protection system will be the two time by auxiliary diagnosis system. Fault Auxiliary diagnosis system will be based on open software interface of the original control and protection system, operating system and servers. And keep the aided diagnosis system with compatibility and versatility. The Auxiliary system obtains a large number of real-time data suspicious operating by NetDDE technology, and Analog monitoring functions: the limit of detection, data storage and the real-time trend analysis. In order to reduce the memory overhead, the switch quantity will be accessed using interrupt method. In order to achieve the server fault monitoring, a server warning or error event tracking process is established by the stored procedure function of SQL system. The event tracking process is called by the application to obtain the tracking information. The system also established data analysis module and database browsing module etc. Data analysis is mainly to query recording data playback, analyze