环境应力作用下航天电连接器可靠性试验方案研究-机械设计及理论专业论文.docxVIP

浙江大学硕士学位论文Abstract 浙江大学硕士学位论文 Abstract In this dissertation，the model Y11X．1419 electrical connector as the obiect．under temperature and vibration stresses，the failure mechanism has been analyzed，the Reliability Model has been built．Based on above．the Reliability Test Method of electrical connectors has been deeply researched． Firstly,briefly stated the developing history and current situation of Reliability Engineering，introduce the Reliability Test Method and developing trends．Moreover， the statistical analysis method and existing problems，electrical connectors reliability research‘S current situation and existing problems，and reliability test plan and existing problems was presentation． Secondly,through analyzing the failure instance of electrical connectors，educed the four main modes of failure of electrical connectors，and make Faulity．Tree Analyze．It is educed that contact fault was a main mode of failure of electrical connectors．and the two main factors which affect the contact fault are temperature and vibration stress The failure mechanism of electrical connectors under the two stresses is discussed． Thirdly,through analyzing the relation between the temperature and vibration stress and the life of connector，And combining with the theory of probability and statistics， deduce the failure physics equation，and set up a reliability statistical model．Laid a foundation for working out electrical connector reliability test plans and treating electrical connectors test data． Fourthly,proposed and researched optimizing design mode of constant stress accelerated 1ife test plans under the temperature and vibration stresses．Four stresses levers are achieved through optimizing design under surrounding temperature or vibration stress alone affected． Fifthly,using uniformly orthogonal design theory to arrange the four-lever temperatures and four-lever vibration stress．catch an excellent accelerated life text plan．which make the estimate value have the well precision in nor