AT-1724Allison-Transmission,-Inc.-Global-Transport-Label-课件.pptxVIP

AT 1724Allison Transmission, Inc. Global Transport Label StandardAT 1724A – Individual ContainerAT 1724B – MASTER ContainerAT 1724C – MIXED LOAD ContainerSPECIFIC CRITERIA FOR THE ALLISON TRANSMISSION (ATI) GLOBAL TRADING PARTNER LABEL TEMPLATE: THE TEMPLATES IDENTIFIES HOW AND WHERE DATA IS TO BE PLACED ON THE LABEL WHEN IT IS REQUIRED AS PART OF A ATI BUSINESS REQUIREMENT: 1724A IS FOR INDIVIDUAL CONTAINERS OF LIKE PARTS 1724B IS FOR MASTER LABEL – CONTAINER OF INDIVIDUAL CONTAINERS OF LIKE PARTS 1724C IS FOR MIXED LOAD LABEL – CONTAINER OF INDIVDUAL CONTAINERS OF UNLIKE PARTS FONT SIZES ARE SPECIFIED FOR READABILITY - DATA THAT WILL NOT FIT AT THE SPECIFIED FONT SIZE IS TO BE TRUNCATED OR ABREVIATED. WHEN A MATERIAL HANDLING CODE (ALSO KNOWN AS “DLOC” / Allison Plant Delivery Location) IS REQUIRED, RECEIVING LOCATIONS ARE RESPONSIBLE FOR PROVIDING THE CORRECT INFORMATION TO THE SUPPLIER (VIA EDI) LABEL DIMENSIONS ARE NOMINAL - A6/AIAG IS APPROXIMATELY 102 MM (4”) HIGH BY” 152 (6 MM) WIDE A5 IS APPROXIMATELY 148 MM (5.80”) HIGH BY 210 MM (8.25”) WIDE REDUCED HEIGHT LABEL IS APPROXIMATELY 74 MM (2.9”) HIGH X 210 MM (8.25”) LABELS SHALL BE PRINTED WITH BLACK CHARACTERS ON WHITE BACKGROUND (NEITHER COLORED STOCK NOR COLORED INK IS ALLOWED) FONTS SHALL BE UPPERCASE BOLD ARIAL NARROW, HELVETICA CONDENSED OR EQUIVALENT BAR CODE SYMBOLOGIES ON THE LABEL SHALL BE: CODE 128 LINEAR BAR CODE, AND, PDF417 2-D BAR CODE DATES SHALL BE IN THE INTERNATIONAL FORMAT OF “DDMMMYYYY” (Ex: 25SEP2001) GROSS WEIGHT SHALL BE EXPRESSED IN LBS (ROUNDED, NO DECIMAL) LABELS SHALL BE VERIFIED AS LEGIBLE BY THE SUPPLIER PER AIAG (B10, B14, B8, B16), ODETTE, QS9000 AND ISO STANDARDS (NOTE: BAR CODES MUST BE EASILY SCANNABLE AND MEET OR EXCEED ISO PRINT QUALITY “C” AT POINT OF RECEIPT) LABELS SHALL BE AFFIXED IN ACCORDANCE WITH AT1700 GUIDELINES (USUALLY OPPOSITE ENDS OF EACH CONTAINER)THIS DOCUMENT IS AVAILABLE AT ALLISONTRANSMISSION.COMFOR ADDITIONAL INFORMATION PLEASE CONT