CG公司100万吨棒材生产线项目方案设计与可行性分析.pdfVIP

ABSTRACT In order to adapt the new situation of iron and steel industry changing develpment mode ,optimizing structure,industry upgrading and overall improving the economic running qualitry and benefits, iron and steel enterprises must continuously perform technology improvement and structure adjustment ,and improv equipment level,so that extricate itself from the predicament of competiting in the low end market. Therefore, CG Co.,Ltd. intend to build up a new 1000000-ton bar continuous-rolling line which has good market prospect by eliminate backward production capacity according to its own development status and market situation, in order to improve the living and developing ability in the future. Basing on the theory of project target management and project feasibility study, this article describes the purpose meaning and stage division and its contents of the project feasibility study by feasibility study technique and method, make project design and feasibility sdudy for CG Co.,Ltd. 1000000-ton bar continuous-rolling line project. On the basis of fully investigation, the paper gives a detailed description about the background, product, positioning and market analysis of the 1000000-ton bar continuous-rolling line project, analyzes the site selection scheme, site construction condition and the advantage of project construction, etc. Put forward the feasibility at policy,market,site construction condition,technical condition, social and economic benefits and other aspects of the production line by analyzing the enterprise location characteristics and peripheral bar Market Environment. This article mainly discusses the process scheme of the production line p