管道工程施工质量管理细则(中英文)206kb85586305文档.doc

QUALITY MANAGEMENT DETAIL RULES ON PIPING CONSTRUCTION CONTRACT 管道工程合同施工质量管理细则 合同编号： Number of Contract: 目录Content 1.0 编制目的及适用范围Purpose for Preparation and Scope of Application 2.0 编制原则Principles for Preparation 3.0 执行标准及有关规定 Applicable Standards and Relevant Regulations 3.1 中国政府的相关法规和政策 Relevant laws, regulations and policies issued by Chinese government: 3.2 SECCO项目IPMT质量体系有关文件 Documentation related to IPMT quality system of SECCO project: 3.3 SECCO项目IPMT规定和要求 IPMT regulations and requirements of SECCO project: 3.4 施工验收标准及规范Standards and codes for construction acceptance: 4.0 冲突和协调Conflict and Coordination 5.0 专业技术经理与专业工程师 Specialist Technical Manager and Specialist Engineer 5.1 专业技术经理Specialist technical manager 5.2 专业工程师Specialist engineer 6.0 HSE 7.0 施工过程中工程施工质量的控制 Quality Control in the Process of Construction 7.1 主要依据Main basis 7.2 熟悉现场管理体系、建立工作接口 Acquaintance with site management system and establishment of working interface 7.3 技术准备Technical Preparations 7.4 组织设计交底Organization Design Briefing 7.5 图纸与设计文件会审 Joint Check-up of Drawings and Design Documents 7.6 审查施工组织设计和施工方案 Check-up of Construction Organization Design and Construction Plan 7.7 施工过程的质量控制点的制定和检查程序 Procedures for the Establishment and Inspection of Quality Control Points in the Construction Process 7.8 施工过程中的质量控制 Quality Control During the Construction Process 7.8.1 原材料的检查与验收原则 Principles for the Inspection and Verification of Raw Materials 7.8.2管子抽检的内容和比例Contents and Percentage of Pipe Spot-check 7.8.3 其他管道组成件抽检的内容和比例 Spot-check Contents and Percentage of Other Pipe Components 7.8.4 阀门的检验与试验（包括管道视镜、过滤器及阻火器检验） Valve Inspection and Experiment (Including the inspection of pipe signt glass, strainer and flame arrestor) 7.8.5采用的主要管道器材标准（规范）Major Piping Specifications Standards (or codes) 7.8.5.1 材料标准 Material Standards 7.8.5.1.1 无缝钢管Seamless Steel Pipe 7.8.5.1.2 焊接钢管Welded Steel Pipe 7.8.5.1.3 管件Pipe fittings 7.8.5.1.4 联接件Pipe joints 7.8.5.1.5 阀门Valves 7.8.5.2 应用规范Appli