煤粉捏合器内部流动数值模拟与优化-化工过程机械专业毕业论文.docxVIP

浙江大学硕士学位论文Abstract 浙江大学硕士学位论文 Abstract As the key equipment of the initial stage of coal liquefaction technology,coal slurry preparation device directlY affects the entire COal liquefaction process． Currently,there are rarely reports about coal slurry preparation device which is applied in the coal liquefaction industary．With the continuous deepen of coal liquefaction project．the research OR coal slurry preparation device is i_rnmincnt．At home and abroad,few theoretical researches on the multiphase flow in longitudinal solid-liquid mi)【ing device by using computational fluid dynarnics(CFD)method have been done． Under design conditions，the flow in coal kneading device was studied in this paper by using CFD package FLUENT 6．2．The multi-reference frame(MRF)、RNG k-s aIburlent model and Mixture multi-phase flow model were used in the simulation．In terms of this method，a detailed internal flow distribution was obtained by numericM simulating the flow of coal kneading device．Then,the experimental datum were used to veil鸟the simulation results，and they agreed very well，which proved也缸this numerical simulation method was accurate and reliable．At the sarne time，two different COal feeding methods-coal from the vertical pipe and from the inserted mbe，were separately simulated and analyzed．According to the imemal flow distributions under two different COal feeding methods，we made a iudgement也at the former feeding method Was better than the latter． To further optimize the coal kneading device，some other simulations were done by changing the rotating speed of shafc、the import flow of coal and oil、the form of impellcr and the space between blade outer end and mixing tank．Results showed that： for this mixing tank．the given design values of rotating speed of蝴and the import flow of materials are optimal，and impeller which is six．slant．blade Rushton turbine wi也253mm diameter should be adopted The results are ofreference to the design and optimum ofcoal slurry preparation device． Keyword