落石冲击下设缓冲层钢筋混凝土板的计算-结构工程专业毕业论文.docxVIP

Abstract Abstract 西安理工大学硕士学位论文 西安理工大学硕士学位论文 II II III III Title ： CALCULATION OF REINFORCED CONCRETE SLAB WITH CUSHION LAYER UNDER ROCKFALL IMPACT Major：Structure Engineering Name：Huanhuan LI Signature: Supervisor：Prof. Junfa ZHANG Signature: Abstract In order to protect the mountain important buildings, it suffered after rockfall hazards will not be completely smashed. Proposed to provide a buffer layer on a reinforced concrete roof structures important to achieve the purpose of energy-absorbing cushion. In rockfall impact, the cushioning material by some of the impact cushioning effect of the buffer is consumed, so as to achieve a direct effect of a large impact on the effect on the concrete roof reduced purposes. Due to the large rockfall impact energy, impact time is short, involves large deformation and complex energy conversion, and so, under the dynamic buffer structure rockfall impact response studies with a certain degree of difficulty. In this paper, the simplified structure of reinforced concrete roof as the prototype, using ANSYS/LS-DYNA dynamic finite element analysis software to analyze the effect of process rockfall impact plus cushioning material reinforced concrete slab, research rockfall from a height of one meter, respectively, and three-meter fall , it impact plus dynamic mechanical response of several different cushioning materials, reinforced concrete slab, and provide reference for rockfall protection engineering design. Calculated by the simplified model in this paper to get the physical structure, the use of ANSYS/LS-DYNA specialized postprocessor ls-prepost, dynamic response analysis of the different circumstances under reinforced concrete slabs, concrete research work is as follows: Establish without any cushioning materials, plus rubber, plus soft rubber, cystosepiment plus four types of buffer layer structures were in shock from falling rocks falling 1m and 3m, a total of eight models; Analysis of various models’ dynamic stress