电动百叶窗毕业论文.doc

电动百叶窗毕业论文 PAGE IV 电动百叶窗毕业论文 题 目： 电动遥控百叶窗的设计与实现 摘 要 随着生活质量的提高人们对居住环境要求越来越高，应用于改善室内光线的百叶窗也得到很大的发展逐渐趋向于自动化。 本论文主要阐述了以单片机控制技术为核心，系统主要由单片机主控模块，红外线接收模块，LED数码管显示模块，步进电机驱动模块，电源模块和百叶窗窗体结构组成；其中系统采用了HX1838红外接收头采集红外线脉冲然后将数据传给STC12C2052红外接收单片机解码，解码后的数据输送到52单片机主控模块从而达到驱动步进电机转动进而控制百叶窗卷帘的开合的目的。 电动遥控百叶窗可以用红外线在10米内使电机5级速度的调速，可以快捷、方便的实现开合，在不同的室内场合具有广泛的实用空间。 关键词：红外接收；步进电机；单片机；正反转；调速；百叶窗 Abstract With the improvement of life quality people what living environment asks is more and more high, applied to improve the indoor light blinds also got a lot of development tend to automation. This thesis mainly states the single-chip microcomputer control technology as the core, system mainly by the single chip microcomputer control module, infrared receiver module, LED digital display module tube, stepping motor driver module, power supply module and the shutters form structure; Among them, the system adopted HX1838 infrared sensor acquisition infrared pulse and then will STC12C2052 infrared data to receive microcontroller decoding, decoding of data transmission to 52 single chip microcomputer control module so as to drive stepping motor rotation and then control of the purpose of opening the shutters shutter. Electrical control shutter can use infrared within 10 meters make motor level 5 speed control and speed regulation, can be quick, convenient realize close, in different indoor occasions has extensive practical space. Keywords: infrared receiver；stepping motor；scm；positive inversion；Adjust speed ；Window shades 目 录 引言 ……………………………………………………………………………1 1 任务要求与总体设计方案 …………………………………………1 1.1 设计任务要求………………………………………………………………1 1.2 总体设计方案 ……………………………………………………………1 1.2.1硬件设计方案 …………………………………………………………………1 1.2.2软件设计方案 ………………………………………………………………3 2 系统硬件电路设计 ……………………………………………………4 2.1 红外线发射接收模块………………………………………………………4 2.1.1红外线发射码的分析 ………………………………………………………4 2.1.