考虑竖向力影响时轻钢轻板框架二阶效应的计算-结构工程专业毕业论文.docx

ABSTRACTBased ABSTRACT Based on summarizing al l kinds of design theories of second-order effect about 1 ight steel fcames，this article calculates structural member’S load—deformation curves when carrying horizontal load．and the results show they are different to those considering initial deflection or initial corner：and gets the influential coefficients of one-storv frame which bottom connection is rigid or flexible when the frame carries vertical load，and those coellficients can be used according to different beam—column 1inear stiffness ration． According to the seismic code’S specification that does not consider second—order effect formula for frame structure，this article also derives the minimum load formula of those second—order effect approximate calculation methods，at the same time unifies magnified coefficient formula of second—order elastic method，load—deformation formula and the formula of inner load—deformation：and improves second—order elastic method and卜4 method according to the influential coefficients when carrying vertical load，it al SO improves the structural member with those coefficients when having considered尸-一4 and P一8effect．derives those methods’stability coefficient、magnified coefficient and calculation length coefficient，those data show that improved methods are more exact and the results which consider vertieal load influence to structural lateral stiffness are most safe。 Additionally，thiS art icle also calculates frame’S inner load and deformation considering the infilled panels to take part in work in different frame aspect rati0，and the results show second—order effect can be neglected。 [Keywords]Light Steel Frame：Second．Order Effect；Resistant Lateral StiffneSS Stability；Vertical Load II 长沙理工大学 长沙理工大学 学位论文原创性声明 本人郑重声明：所呈交的论文是在导师的指导下独立进行研究所 取得的研究成果。除了文中特别加以标注引用的内容外，本论文不包 含任何他人或集体已经发表或撰写的成果作品。对本文的研究做出重 要贡献的个人和集体，均已在文中以明确方式标明。本人完全意识到 本声明的法律后果由本人承担。 作者签名： 滟$ 日期：声吖年r月君日 学位论文版权使用授权书 本学位论文作者完全了解学校有关保留、使用学位论文的规定， 同意学校保留并向国家有关部门或机构送交论文的复印件和电子版，