毕业论文 闹钟前盖注塑模具设计.docVIP

毕业设计（论文） PAGE PAGE 1 毕业论文 闹钟前盖注塑模具设计 摘 要 本文讲述了闹钟前盖产品的注塑模具的整个设计过程。首先介绍了塑料的结构特点与性能；塑料的组成与工艺特性；塑料成型工艺以及塑料塑件的结构工艺性。其次是对注射成型原理及工艺特性、注射模具的结构与注射机、塑料制品在模具中的位置与结构零部件的设计、浇注系统设计、成型零件设计、推出机构设计、侧向分型与抽芯机构的设计、温度调节系统等多方面的介绍。在设计过程中进行了包括成型零件尺寸的计算和对注射机的锁模力、最大注射量、注射压力、开模行程的计算以及模具与注射机安装部分相关尺寸的校核。 设计过程中对产品的工艺性能进行全面的分析，主要分析了塑料制件的形状特性、尺寸特点、尺寸标注方法、精度要求、制件表面质量和材料组成性质等因素。在设计过程种使用到了CAD软件和PRO/ENGNEER对塑件进行三维造型。 关键词： 注射模具；推出机构；成型零件；锁模力；侧向分型与抽芯结构。 Abstract This paper describes the alarm front cover product of the injection mold of the entire design process. Plastics are introduced. The structure characteristics and performance; plastic composition and process characteristics; plastic molding process and plastic plastic parts of the structure process. After the injection molding principle and process characteristics, injection mold structure and the injection machine, plastic products positioned in the mold and structural parts of the design, the design of gating system, molding part design, mechanism design, introduced the side-parting core-pulling mechanism design, the temperature control system and other aspects of the introduction. In the design process was carried out including forming part of the calculation of the size and on the clamping force injection molding machine, injection volume, injection pressure, the opening stroke calculation as well as the mold and the injection machine installation part size check. Design process of product process performance to carry on the comprehensive analysis, mainly analyses the characteristics of plastic parts shape, size characteristics, dimensioning, precision, surface quality and material properties of parts and other factors. In the design process for the use of the CAD software and PRO / ENGNEER of plastic parts for three-dimensional modeling. Key words: injection mold; molding parts; mechanism; clamping force; the side-parting core-pulling structure. 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325