镁合金微弧氧化膜层表面特性对复合膜层影响与结合机理研究-材料科学与工程专业毕业论文.docxVIP

西安理工大学硕士学位论文 II III III Abstract Title: THE INFLUENCE OF CERAMIC COATING - SURFACE CHARACTERlSTICS FOR COMPOSITE COATINGS - ANDTHE -aONDING MECHANISM OF COMPOSITE COATINGS RESEARCH ON A MAGNESIUM ALLOY M司or: Materials Science and Engineering Name: Chaojing YANG Supervisor: Prof. Huiying SHI Signature:_G叫阿 Signatur缸矿μ1ì ?μ、 J Abstract By means ofMicro-arc oxidation (MAO) and electrophoresis technique obtain the ceramic coa由19 缸ld protective composite coa由19S on a magnesium alloy. (1)Ana1yse the ceramic coa由19 property and it is effect on composite coatings in 吐le different MAO processing 由ne and pulse width. (2)Analyse the binding processes of composite coating at the beginning of the electrophoresis in 也e different electrophoresis time and voltage. 卫le ceramic coating samples and protective composite - coatings samples were ana1yzed by using the SEM，EDS， electrochemical analysis an? cross cut test. The conclusion show.导:_that with the Micro-arc oxidation processing 世me increased 臼 14min ，the larger diametelMAO pores will appe缸缸ld diameter increased to 6阳n. \\吁len 也e time increased to 11时n，impedance analysis showed 也at 也e porous layer impedance is about x 105n/cm2， dense layer impedance is about 7.491x 104n/cm 2，the dense layer effect weaken. The corrosion current density of ceramic coa由19 is about 10-5 order of magnitude 1educed to 10-7，the ceramic coating decreased in resistance to corrosion. W社h the Micro-arc oxidation pulse width increased to 100阳，也e thickness of ceramic coating is about 15.7 阳n ， 也e larger diameter MAO pores w山 appear，and the roughness of the ceramic coating increased 切 0.92阳n. The impedance analysis showed 由at dense layer- impedance of ceramic coa由19 decreased from 7.4 14x105n/cm 2 to 1.957x 10n/cm2，and the resistance to corrosion of cerarmc coa由19 is bad when the Micro-arc oxidation pu1se width increased to 60μs. By rneans of e1ectrophoresis technique obtain the compos让e coa由19S on the ceramic coat