基于ProE二次开发的直齿圆柱齿轮二级减速器参数化设计毕业论文.doc

PAGE I 毕业论文 基于Pro/E二次开发的直齿圆柱齿轮二级减速器参数化设计  摘 要 基于Pro/E的参数化建模及单一数据库技术，建立了齿轮、轴、箱体及减速器传动系统的参数化模型。主要参数化对象包括：齿数、模数、齿轮外形尺寸参数；轴段长度、直径、倒角等参数；轴承内径、外径和宽度等参数；以及箱体底座和上盖模型的90%以上的结构参数，基本实现了整个减速器模型的参数化设计。 以Visual C++和Pro/E的二次开发工具Pro/TOOLKIT为平台，通过动态链接库方式，开发了减速器参数化设计的主菜单及用户界面，通过对话框可方便直观的控制减速器模型各参数，在Pro/E Wildfire 5.0平台上成功实现了减速器参数化设计系统的二次开发。在机构仿真模块中对减速器传动系统进行了运动学仿真分析；绘制了相关零件图和装配图。 关键词：减速器；参数化设计；二次开发；Pro/E；Pro/TOOLKIT；Visual C++ Abstract This design accomplished the parameterized modeling of gear，shaft, box and the transmission system of reducer based on the parameterized modeling and single database technology of Pro/E. The main parameterized objects include the following aspects: the number of teeth, module, dimensional parameter of the gears shape; the length, diameter, chamfer and other parameters of a part of shaft; bearing’s internal and outer diameter, width and so on; at last, more than 90% structure parameters of the model which based on box’s base and top cap. Basically, this paper achieved the parameterized design of the whole reducer model. Based on the Visual C++ and Pro/TOOLKIT, the secondary development tool of Pro/E, having developed the main menu and user interface of the reducer’s parameterized design through the Dynamic Lick Library. Each parameter of the reducer model can be controlled easily and visually with the dialog box. The secondary development of the reducer’s parameterized design system was accomplished on the platform of Pro/E Wildfire 5.0. Kinematics simulation of the reducer rotating system was analyzed in the organizational simulation module, as well as the related part and assembly drawings were drew. Keywords: reducer; parametric design; secondary development; Pro/E；Pro/TOOLKIT；Visual C++ 目 录 TOC \o 1-3 \h \z \u 1 绪论 h 1 1.1 课题研究背景及意义 h 1 1.2 国内外研究现状 h 2 1.2.1 减速器的研究现状 h 2 1.2.2 CAD技术研究现状及发展趋势 h 2 1.3 本文主要研究内容 h 3 2 减速器零件的参数化建模及装配 h 4 2.1 齿轮的参数化建模 h 4 2.1.1 齿轮的几何参数 h 4 2.1.2 模型的建立 h 4 2.2 轴的参数化建模 h 5 2.2.1 阶梯轴