综合楼框架结构毕业设计计算书.doc

本科毕业生毕业设计 目 录 目录··············································1 任务书············································2 中英文摘要········································4 正文··············································5 4.1结构方案的概述··································5 4.2主要设计方法····································7 4.3设计心得体会····································8 4.4计算部分······································10 4.4.1楼板计算························ 4.4.2基础计算········· 4.4.3楼梯计算································· 4.4.4 pkpm计算························· 4.4.5 内力计算·················· 4.5施工图绘制（9张）·······························65 参考文献··········································71 附录··············································72 致谢··············································74 @@@@@@成人教育学院 毕 业 设 计 任 务 书 （钢筋混凝土框架结构设计组） 一、设计题目：xx市 综合楼 项目（工程） 二、建设地点：xx市 三、设计原始数据（资料） （1）自然条件 1、建筑物等级 建筑结构安全等级为二级，设计基准期为50年，基础设计等级为乙级。 2、工程地质条件 抗震设防烈度为7度，设计基本地震加速度值为0.10g，设计地震分组为第一组。 场地类别：A类，详《地质勘察报告一》。 3、气象条件 基本风压值（1.15KN/m2）。 4、材料供应 240厚标准砖。 5、施工条件和能力 活荷载取值：（KN/m2） 楼面2.5 、走廊2.0、楼梯3.5、屋面3.0。 （2）建筑规模 层数 层高 房间组成及面积 1、规模：占地面积982.23 2、层数：三层 3、层高：底层4.2m，其于各层3.3m。 4、房间组成及面积 办公室、档案室等，总建筑面积5893.36 m （3）参考资料 详参考文献。 中英文摘要 综合楼设计包括建筑设计和结构设计，在建筑设计方面，结合各功能的分区与绿化和消防上的综合考虑，进行了建筑体型的选择、平面的布置、立面的设计。结构设计利用结构专业软件PKPM进行，然后根据计算结果调整建筑方案。设计成果包括总体设计说明书，建筑及结构施工图，结构设计计算书。最后对整个设计过程中的出现的问题和设计心得进行总结。 [关键词]： 设计 结构设计 PKPM Abstract Complex building contains architectural design and structural design. Combining the comprehensive consideration on the district and greeing of the functions as well as fire ,the design of building body including the choice of the construction ,graphic layout and the design elevation .The structure for professional sofeware PKPM is used in structural design ,and adjust the architecture programme according to the results .The outcome document including general instruction of design,architecture and the construction of the structure plans and calculation book of structural design .To sum up the issues and experi