端板连接高强度螺栓群中和轴位置研究.pdf

第22 卷 第3 期 建筑科学与工程学报 Vol. 22 No. 3 2005 年9 月 Journal of Architecture and Civil Engineering Sept. 2005 : 1 732049( 2005) 1 1 2 2 王素芳 , 陈以一, 陈友泉, 魏潮文 ( 1. , 200092; 2. , 310003) : 为研究端板连接 高强度螺栓群的 和轴位置变化, 对门式刚架外伸式端板连接进行了试 验研究与理论计算试验采用4 种梁截面尺寸, 选择端板厚度和端板加劲肋作为研究参数, 对12 个试件进行了单调加载试验, 通过在螺栓杆无螺纹区开槽粘贴应变片测量了端板螺栓力的变化情 况理论计算系建立带弹性支座的连续梁模型模拟端板连接, 将模型计算结果与试验结果比较分 析, 结果表明: 加载过程 , 螺栓群 和轴逐渐从其形心轴向受压区移动, 但不超过受压翼缘内侧螺 栓 心线; 极限状态下, 受拉翼缘和端板可简化为等效T 型件根据理论模型, 进行了简单的参数 分析, 研究了撬力端板厚度和螺栓排列等对连接性能的影响最后结合试验结果及理论计算, 对 现有计算方法进行了评价 : 端板连接; 高强度螺栓; 和轴; 理论模型 : T U323 : A Research on neutral axis location of highstrength bolts of endplate connections 1 1 2 2 WANG Sufang , CHEN Yiyi , CHEN Youquan , WEI Chaow en ( 1. School of Civil Engineering, T ongji University, Shanghai 200092, China; 2. Zhejiang Hangxiao Steel Structure Corporat ion Ltd, Hangzhou 310003, China) Abstract: In order to study the neutral axis location of highstrength bolts in extended endplate connections, a series of joint tests from portal frame and theoretical analysis w ere executed. There w ere altogether tw elve connection specimens, w hich including four kinds of beam sections, w ere tested under monotone loading . Bolt force w as measured by the strain gauges affixed to notched bolt shanks. Such parameters as endplate thickness and endplate stiffener w ere introduced. Continuous beam models w ith spring supports w ere set up to model endplate connections. By comparing the results from tests w ith those from model anal