蜗轮减速器箱体机械加工工艺及夹具设计.docVIP

这次设计涉及机械制造工艺和机床夹具设计，金属切削机床，公差，协调和测量等诸 多方而的知识。 蜗轮减速器箱体零件的工艺规划和夹具设计包括加工工艺设计，工序设计和夹具设计 三部分。在过程设计中应首先了解零件的分析过程，然后设计毛坯结构，并选择好加工零 件的定位基准，设计零件的工艺路线;然后对零件各个工步的工序进行尺寸计算，再通过 《机械加工工艺简明速查手册》找到对应刀具及切削三要索进行查填入工艺卡片;然后设 计专门的夹具，先设计岀夹具体，然后再设计每一个相关的零件，如定位元件，夹紧元件, 导向元件，然后再闹出标准件，计算夹具定位产生的定位误差，找到指导老师帮助分析合 理性夹具结构不足，进而注重未来设计的改进。 关键词：蜗轮减速器箱体工艺夹具定位夹紧误差 Abstract This design relates to the mechanical manufacturing process and fixture design, metal cutting machine, tolerances, and coordinate measurement and many other aspects of knowledge ? Including the design process planning and fixture design of worm gear reducer box parts, process design and fixture design in three parts. In the process of design should first understand the analysis process of parts, and then design the blank structure, and choose a good location machining datum, the process route design of parts and parts of each step; process size calculation, and then through the Hinfo processing machinery concise manual find the corresponding tool and cutting the three elements to fill in the craft card; then design A special fixture, to design a specific folder, then design every relevant parts, such as the positioning element, the clamping element, the guide element, and then draw out the standard, calculation of location error of fixture location generated by the teacher to help find guidance for analysis on the rationality of the fixture structure is not enough, and then improve the design in the future. Key words: worm reducer box process fixture positioning clamping error 摘要 TOC \o 1-5 \h \z \o Current Document \h Abstract II \o Current Document \h 第1章绪论 1 \o Current Document \h 第2章工艺设计 2 \o Current Document \h 2.1零件的分析 2 \o Current Document \h 1. 1 零件的作用 2 \o Current Document \h 1.2零件的工艺分析 2 \o Current Document \h 2.2毛坏选择 2 \o Current Document \h 2. 2. 1 毛坯的种类 2 \o Current Document \h 2. 2.2毛坯尺寸公差与机械加工余量的确定 2 \o Current Document \h 2. 2.3 设计毛坯图 3 \o Current Document \h 2.3定位基准的选择 4 \o Current Document