轴向柱塞泵英文文献及翻译.docx

Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology Abstract: A particular emphasis is placed on the virtual prototype technology (VPT) of axial piston pump. With this technology it is convenient and flexible to build a complicated 3D virtual based on real physical model. The actual kinematics pairs of the parts were added on the model. The fluid characters were calculated by hydraulic software. The shape of the parts, the flexible body of parts, etc. were improved in this prototype. So the virtual prototype of piston pump can work in computer like a real piston pump, and the flow ripple, pressure pulsation, motion principle, stress of parts, etc. can be investigated. The development of the VPT is introduced at the beginning, and the modeling process of the virtual prototype is explained. Then a special emphasis is laid on the relationship between the dynamics model and the hydraulic model, and the simulations on the flow ripple, pressure pulsation, motion principle, the stress and strain distribution of the middle shaft and piston are operated. Finally, the advantages and disadvantages of the VPT are discussed. The improved virtual prototype of piston pump more tally with the real situation and the VPT has a great potential in simulation on hydraulic components. Key words: virtual prototype, axial piston pump, dynamics 1 Introduction? Axial piston hydrostatic pump is an important hydraulic component, which is widely applied both in industry and mobile machine. As the piston pump has complicated structure and composite high-speed motion, so it is difficult to do exactly research on the pump. The pump model is always simplified to a great degree. And the simplifications bring considerable deviation. With the development of computer and multi-body dynamics, the virtual prototype technology (VPT) is used for studying hydraulic system and components. Virtual prototype technology is a new engineering technology. With the VPT complex mechan