棉型经纱可织性分析-纺织材料与纺织品设计专业毕业论文.docxVIP

II II Research 00 明Teavability ofCottoo-type Warp Yaros Speciality: Textile Material and Textiles Design Name: JIANG Haiqin Supervisor: YANG Hongying Abstract ln the weaving process，the warp yarns must take combined stresses which come from warp tension and all kinds of friction force. The capacity of yams withstand the stress of these complexes can be known as the Weavabi lity of warp yarns. The 100m effíciency and end breakage of yams were considered the most important indexs which evaluated the Weavability of wa叩 yarns. If the higher efficiency looms have and the lower end breakage of yarn ，the be忱。. Weavabil吗r of warp yarns. There were some complicated factors effect the weavability of warp yarns，but a suitable appraisal index system has not been fOW1d by now. If a suitable indicator system be found ，which not only predict quality problems of the weaving process，but also provide the basis for quality ∞ntrol of the former working procedure According to the domestic and international research ，some new indexs were proposed through deeply analysis to the factors that affect the weavability of warp yam s in this topic. The 10 varieties of cotton type yarn which we choose as the experimental material were raw yams and sizing tìom large mill s，and these yams were typical ，large range of activity and steady quality. According to the summarized indexes ，we did experiments under the existing experimental conditions and obtained coηesponding experimental data. Through the correlation analysis between the experimental data of each index，the end breakage ends and the the weaving efficiency respectively，the more important indexs that influence the Weavability of warp yams were summarized The more important indexs were mean square deviation (CV%)，the coefficient of average d巳viation irregularity (U%)，the thin of -30%，the thick of +35% ，the neps of + 140%，the hairiness of 3mm，breaking strength irregularity，extension at bre