光伏组件单串焊工艺毕业论文.doc

PAGE IV 毕业论文 题 目 光伏组件单串焊工艺 二级学院 新能源科学与工程学院 专 业 光伏材料加工与应用技术 光伏组件单串焊工艺 摘 要 随着人类对能源的需求越来越大，传统能源日益枯竭，人们开始寻找新能源来替代传统能源，这其中包括太阳能。太阳能光伏发电是太阳能利用领域之一，很好地解决了能源与环境的问题。太阳能发电实际应用的主要是硅系材料电池，晶体硅太阳电池组件是现在技术最成熟、应用最广泛的太阳电池组件。组件的的产业化技术不断改进、规模不断扩大。光伏组件的制造工艺包含多道工序，其加工质量直接影响电池的使用寿命、整体转换效率。 本文介绍晶体硅太阳电池组件的生产流程及各环节注意事项，详细的介绍了组件生产工艺的单焊工艺和串焊工艺及注意事项。从而让大家对此工序有所了解，指导作业减少一些不必要的问题。 关键词：晶体硅太阳电池组件；单焊工艺；串焊工艺；注意事项 Welding technology for solar cells discussed Abstract As human demand for energy is increasing, traditional energy sources are depleted, people began looking for new energy sources to replace traditional energy sources, including solar energy.Solar photovoltaic power generation is one of the field of solar energy utilization, a good solution to the energy and environmental issues. The practical application of solar power generation is mainly silicon material cells, crystal silicon solar cells is now the most mature technology, the most widely used solar modules. Component of the industrialization of the technology continues to improve, have been expanding. PV module manufacturing process consists of multiple processes, the processing quality directly affects the battery life, the overall conversion efficiency. This article describes the production process of crystalline silicon solar modules and links to notes, details of the single components of the production process welding process and string welding process and precautions. So that you understand this process to guide operations reduce the number of unnecessary problems. Key words: crystalline silicon solar cell components; single welding process; string welding process; note 目 录 TOC \o 1-3 \h \u 太阳能电池片（整片的两种规格125*125mm、156*156mm）或由激光机切割开的不同规格的太阳能电池组合在一起构成。单个太阳能电池往往因为输出电压太低，输出电流不合适，晶体硅太阳能电池本身又比较脆，不能独立抵御外界恶劣条件，因而在实际使用中需要把单体太阳能电池进行串、并联，并加以封装，接出外连电线，成为可以独立作为光伏电源使用的太阳能电池组件(Solar Module或PV Module，也称光伏组件)。太阳能电池组件通过吸收阳光，将太阳的光能直接变成用户所需的电能输出。 根据光伏电站大小和规