海德盟数控系统培训 - 系统介绍1资料.pptVIP

海德盟数控技术(深圳)有限公司 海德盟数控系统介绍 海德盟数控技术(深圳)有限公司 Leading in Openness 真正先进的开放式数控系统，允许用户集成第三方的专业软件或技术到系统中。同时提供一系列的开放式工具，使得用户可以任意定制自己的个性化界面和自己所需要的特殊功能。 Leading in Architecture 先进的系统设计架构，所有的系统软件全部运行在主PC处理器上,而非传统的双CPU设计思想。 Leading in PC-Based Technology 基于PC平台的CNC技术应用，所有功能均以模块化的形式对用户开放，而不需要进行任何的硬件改动。 Leading in Performance 完善的五轴联动和坐标变换功能，可进行复杂的多轴多通道协调控制，满足各类数控设备的应用需求。 Leading in High-Speed Quality 优化的控制算法，可确保1微米分辨率下实现240米/分的高速控制，是高速、高精度数控机床的最佳选择。 Leading in Customized CNC 提供丰富的功能选项，针对应用领域进行功能优化配置，达到最完美的性能/价格统一。 Leading in Real Time 专用数控实时内核，攻克了Windows操作系统平台上的实时控制难题，在保障数控系统的优异实时性的基础上，突显了系统操作简便界面友好的特性。 海德盟数控系统领先业界的七大技术 A separate timer on the PA axis interface card generates the real-time tick, in essence the “heart beat” of the CNC being the master synch event for the real-time part (runs 500 to 2000 times per second). 实时tick This timer need be served by the software 500 times per second, that way confirming proper functioning of the entire software. In case of drop-out control will be shut down in a controlled manner. 看门狗定时器 (Battery backed), used to store non-volatile information of variables changing in real time, i.e. tool offsets, part programs, fast subprograms, machine system parameters as well as PLC and part program variables. CMOS RAM There is only one CPU in the system, yielding extremely efficient inter- process communications and direct access to the bus (ISA PCI). This facilitates integration of additional real-time interfacing hardware. 单 CPU 构架 IEC 1131-3 conformant Soft PLC with 30..150k instructions per millisec execution speed uses bit-parallel, byte-serial high speed bus for remote I/O. Transfer rate: net 8 MBd, real-time, 200 m max. bus length. 高速并行 I/O 总线 电源管理 These relays signal that power is o.k, temperature in the permissible range and CNC ready, i.e. fully operational. Watchdog timer failure removes ready state. Relay contacts are part of machine safety chain. 海德盟数控系统亮点技术（Ⅰ） 海德盟数控技术(深圳)有限公司 Checks for violations of the established tolerance