- 6
- 0
- 约1.46万字
- 约 25页
- 2019-05-16 发布于江西
- 举报
王雄:SBR法处理小城镇污水工艺设计
PAGE 23
PAGE 23
目录
TOC \o 1-3 \h \z \u SBR法处理小城镇污水工艺设计 1
摘要 1
关键词 1
Abstract. 1
Key words 1
第一章 前言 1
1.1.小城镇污水水质特征 1
1.2 SBR工艺的特点 2
第二章 工艺流程设计及计算 2
2.1废水水质、水量 2
2.2主要构筑物及设计参数 2
2.2.1工艺流程图 2
2.3粗格栅 3
2.3.1设计说明 3
2.3.2 设计参数 3
2.3.3设计计算 3
2.4进水泵房 6
2.4.1 设计说明 6
2.4.2 设计参数 6
2.4.3设计计算 6
2.5 集水池 6
2.5.1设计说明 7
2.5.2 设计参数 7
2.6细格栅及旋流沉砂池 7
2.6.1细格栅设计 7
2.6.2旋流沉砂池 10
2.7 CASS池和滗水器 11
2.7.1设计说明 11
2.7.2 设计参数 11
2.7.3 设计计算 11
2.8消毒池参数设计 17
2.8.1 接触池尺寸计算 17
2.8.2 加氯间 18
2.8.3 排泥设施 18
2.9 污泥浓缩池 18
2.9.1 设计参数 19
2.9.2 设计计算 19
2.10 污泥脱水间 20
2.10.1 设计参数 20
2.10.2 设计计算 20
第三章 主要构筑物及工艺设备清单表 21
第四章 结语 22
参考文献 22
致谢 22
SBR法处理小城镇污水工艺设计
王雄
(甘肃农业大学资源与环境学院08环境工程,甘肃兰州,730070)
摘要:SBR 工艺由于其除磷脱氮效果好、 运行灵活已日益受到重视。本文主要介绍了用 SBR 工艺中的CASS法处理小城镇污水的设计方法, 内容包括小城镇污水水质水量的分析以及工艺流程的确定、进水贮水池的设计、SBR池贮水容积的确定、 污泥沉降速度的计算和池子尺寸的确定、曝气系统和撇水系统的设计以及污泥的处理和池子尺寸的计算。
关键词: SBR法 生活污水 工艺设计
SBR treatment process design of small urban sewage
Wang Xiong
(08 Environmental Engineering, Gansu Agricultural University, Resources and Environmental Sciences, Lanzhou, Gansu 730070, China)
Abstract: The effect of nitrogen and phosphorus removal, flexible and SBR process has become increasingly important. This paper introduces the design method to deal with small town sewage OF CASS SBR process, including analysis of the small town sewage water quality and quantity, as well as the process of design, water storage tank of SBR pool storage volume, sewage mud settling velocity calculation and the size of the pool determine the design of the aeration system and write-water system and sludge treatment and pond size calculation.
Key words: SBR sewage process design
第一章 前言
随着我国中小城镇城市化进程的加快,人口的不断集中,城镇污水排放量也在不断增加,严重影响了水环境。 我国是一个缺水的国家,水污染是其中一个重要方面。中小城镇大多数没有污水处理设施,大量的污水未经处理便直接排入水体,造成了当地的水环境污染。随着我国中小城镇的快速发展,城镇排污量将成倍增长,到2012 年增
原创力文档

文档评论(0)