并联有源电力滤波器交流侧输出滤波器设计-世纪电源网.PDFVIP

14 10 Vol14 No10 2010 10 ELE CTR IC MACH INES AND CONTROL Oct. 2010 1, 2 1 1 1 鞠建永 , 陈敏 , 徐君, 徐德鸿 ( 1. , 310027; 2. , 210003) : 针对输出滤波器存在的放大网侧电流畸变率阻尼电阻发热严重的问题, 提出一种工 化 有源电力滤波器交流侧输出滤波器参数设计方法采用二阶高通滤波器作为有源电力滤波器输出 滤波器拓扑, 在综合考虑输出滤波器的开关纹波滤波效果与电流畸变率电容无功容量电阻功耗 之间关系的基础上, 结合理论分析仿真实验研究, 设计总结了并联有源电力滤波器输出滤波器的 参数选择方法采用该方法为 50 VA 并联有源电力滤波器设计了一套输出滤波器实验结果表 明: 加装输出滤波器后, 电流纹波抑制到滤波前的 1/4以下, 网侧电流畸变率增大约 1 个点, 滤波电 阻上 90% 以上的工频电流被旁路, 电阻发热得到有效控制, 实验结果验证了该输出滤波器设计方 法的有效性 : 谐波; 有源电力滤波器; 输出滤波器 : TM 46 : A : 1007- 449X( 2010) 10- 0015- 06 The AC side output filter design of shunt active power filter 1, 2 1 1 1 JU Jian-yong , CHEN M in , XU Jun , XU De-hong ( 1. Institute of E lectrical Engineering, Zhejiang University, H angzhou 310027, China; 2. StateG rid E lectric Pow er Research Institute, Nanjing 210003, Ch ina) Abstract: In order to resolve the problems of grid side current distortion amplification and damp ing resis-t ance heating, an engineering design method of active pow er filter ac side output filterw asproposed. Sec- ond order high-pass filterw as selected as the topology of active pow er filter output filter. This paper dis- cussed the design m ethod of output filter based on comprehensive consideration of sw itch ing ripple current filtering, totalharmon ic d istortion (THD), var of capacitor, pow er loss of output filter through theoretical analysis and smi u lation. The proposed method w as used to design a